Panasonic AG-AF100A Operating Instruction - Page 114
META DATA screen, OTHER FUNCTIONS screen, SLOT1, NO
View all Panasonic AG-AF100A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
Setup menu list (continued) META DATA screen Item CARD READ Display mode (Camera) RECORD (Camera) USER CLIP NAME (Camera) META DATA PROP (Camera) CLIP (Camera) COUNTER RST META INT SET (Camera) Description of settings Loads the metadata recorded on the SD Memory Card on to the unit. SLOT1, SLOT2, NO • "NO FILE' is displayed when no metadata is recorded on the SD Memory Card. Sets whether to record the metadata to be loaded on the unit simultaneously on a SD Memory Card. ON: Records simultaneously OFF: Does not record simultaneously Selects the method of recording the USER CLIP NAME. TYPE1: The user clip name is the same as the CLIP NAME if no uploaded metadata or data exists. TYPE2: The user clip name is the same as the CLIP NAME if no combination of data and COUNT value is uploaded, or if no uploaded data exists. Displays the metadata recorded in the unit. YES, NO Resets the COUNT value to 1. YES, NO Initializes the metadata recorded in the unit. All settings, including the ON or OFF setting for RECORD are now cleared. YES, NO OTHER FUNCTIONS screen Item LENS CHECK IR REMOTE TALLY LAMP CLOCK SET Display mode (Camera) (Camera) (PB) (Camera) (Camera) (PB) Description of settings ON: Checks the communication status with the lens. Video shooting is not performed if checking is not proper. OFF: Does not check the communication status with the lens. • It is recommended to set LENS CHECK to ON when you are using lenses conforming to the Micro Four Thirds and Four Thirds standard. • When you are using a lens that has no communication connection between the camera and lens through the use of a mount adaptor, video shooting is enabled when you set this item to OFF. Sets the operations of the supplied remote control unit. ON: Accepts commands from the remote control. • Note that if the same type of remote control is used near the unit, the unit may receive commands from the other remote control, during shooting for example, and suddenly operate in an unexpected manner. OFF: Does not accept commands from the remote control. Sets lighting of the tally lamp. FRONT: The front tally lamp (microphone side) lights. REAR: The rear tally lamp (viewfinder side) lights. BOTH: Both tally lamps light. OFF: No tally lamp lights. Sets the built-in calendar of the camera. indicates the factory setting. 62