Panasonic BT-LH2550 Operating Instructions - Page 19

How to Use the On Screen Menu (continued) Picture/volume adjusting menu operations 1. Press [ADJUST] to display the picture/volume adjusting menu. 2. Press [ , ] to select item to adjust. The selected item changes to white. 3. Press [ , ] to adjust. PHASE 0-60 (30) CHROMA 0, 10-60 (30) BRIGHT 0-60 (30) B.LIGHT [BACKLIGHT] 0-60 (50) VOLUME 0-60 (0) ( ) : Factory defaults • Setting [B.LIGHT/CONT.] to CONT. [CONTRAST] in the [SYSTEM CONFIG] menu changes the B.LIGHT indication to CONT. enabling CONTRAST adjustment. CONT. [CONTRAST] 0-60 (50) • Adjustments are not possible under the following conditions. • When "CONTROL" in the "CONTROL" menu is set to "REMOTE," the key mark appears and adjustments cannot be changed. • Setting the MONO function to ON ( page 27) disables the [PHASE] and [CHROMA] operations. • During [RGB-COMP] and [DVI-COMP] input, the [PHASE] and [CHROMA] operations are disabled. • During HV DELAY ( page 33) operation (and a setting other than OFF is selected), [BRIGHT] operation is disabled. 4. Press [ADJUST] to end adjustments. The display is automatically closed after 10 seconds of inaction. • The unit loads set values when the power is turned on. Changed values are automatically saved after 10 seconds. 19