Panasonic BT-LH2550 Operating Instructions - Page 26

Main Menu (continued) VIDEO CONFIG Underlined values indicate factory defaults. Sub menu GAMMA SELECT*1*2 Settings STANDARD STDIO/PST FILM COLOR SPACE SMPTE-C*7 EBU*7 ITU-709 WIDE1 WIDE2 WIDE3 COLOR TEMP. USER0 - 63*5 D93 D65 D56 VAR1 VAR2 VAR3 SHARPNESS MODE*2 HIGH*3 LOW SHARPNESS H*2 0 - 30*3 SHARPNESS V*2 0 - 30*3 Description Selects gamma curve. The gamma curve in the sub-window can be set in the split-screen display and sub-window display (single screen) of the "TWO WINDOW" function. Standard mode Color emphasis mode (a mode that approximates CRT display capability suitable for studio or postproduction application) Film mode (For VARICAM use) The mark appears at the top left of the screen when "FILM" is selected. Sets the color space. The color space in the sub-window can be set in the split-screen display and sub-window display (single screen) of the "TWO WINDOW" function. SMPTE-C standard EBU standard ITU-R BT. 709 standard Sets the gamma curve to 2.2 in wide color gamut (using Adobe color space) mode. Sets the gamma curve to 1.8 in wide color gamut (using Adobe color space) mode. Sets the gamma curve to 2.6 in wide color gamut (using D- Cinema color space) mode. Selects color temperature. Both the main window and sub-window can be set up in the split-screen display of the "TWO WINDOW" function. Adjustable settings 0 - 63 (equivalent to a color temperature range of 3,000 - 9,300K) Equivalent to a color temperature of 9,300K Equivalent to a color temperature of 6,500K Equivalent to a color temperature of 5,600K WB adjustment mode*4 WB adjustment mode*4 WB adjustment mode*4 USER20 is approximately 5000 K and USER33 is approximately 6300 K. Selects the width of outline correction edge. Both the main window and sub-window can be set up in the split-screen display of the "TWO WINDOW" function. Thin edge Wide edge Sets horizontal outline correction. The item display moves to the lower part of the screen during adjustment. Both the main window and subwindow can be set up in the split-screen display of the "TWO WINDOW" function. Sets vertical outline correction. The item display moves to the lower part of the screen during adjustment. Both the main window and subwindow can be set up in the split-screen display of the "TWO WINDOW" function. *1 Changes are not reflected to a still image in the main window in the split-screen display of the "TWO WINDOW" function. *2 These functions are not available when "RGB-COMP." under "YPBPR/RGB" or "DVI-COMP." under "DVI-D" is selected in the "INPUT SELECT" menu ( page 36). The gamma curve is set to STANDARD when "RGB- COMP" or "DVI-COMP" is selected. Selecting WIDE1 to 3 for "COLOR SPACE" produces the gamma curve fixed to that "COLOR SPACE." *3 The following sharpness values are available and the settings for the selected input signal is displayed. Adjustment status during selection appears at the bottom right of the screen. 1) VIDEO system input (VIDEO) (the factory defaults are SHARPNESS MODE: LOW and SHARPNESS H/V: 0) 2) HD for any other input (the factory defaults are SHARPNESS MODE: HIGH and SHARPNESS H/V: 0). 3) SD for any other input (the factory defaults are SHARPNESS MODE: LOW and SHARPNESS H/V: 0). *4 Selecting "VAR1", "VAR2" and "VAR3" engages the WB adjustment mode ( page 28). *5 To select USER0 - 63, 1) Press [ENTER] ("USER" changes to blue). 2) Use [ , ] to select 0 - 63 and press [ENTER]. *7 Factory default setting: SMPTE-C (U.S.A. and Canada), EBU (other countries) 26