Panasonic BT-LH2550 Operating Instructions - Page 22

Main Menu (continued) MARKER This function is not available in split screen display of the TWO WINDOW function. (CROSS HATCH is not affected.) Underlined values indicate factory defaults. Sub menu MARKER 16:9*2*3*4 4:3*2*4 BACK*2 CENTER*2 Setting OFF*1 ON OFF 4:3 13:9 14:9 CNSCO VISTA 95% 93% 90% 88% 80% USER 85% OFF 95% 93% 90% 88% 80% USER 85% NORMAL HALF BLACK OFF ON Description Turns the MARKER setting on and off. Selects/displays the 16:9 marker type. No marker display 4:3 marker 13:9 marker 14:9 marker CNSCO marker VISTA marker 95% area marker 90% area marker 80% area marker 93.1% area marker (TYPE1) 93% area marker (TYPE2) 89.5% area marker (TYPE1) 88% area marker (TYPE2) This area marker can be varied in 1% increments in the range between 80% to 95%. However, an 88% value for a TYPE1 MARKER TYPE indicates an area marker whose height is 89% of available screen height in the selected aspect ratio. (The factory default is 85%.) Selects/displays the 4:3 marker type. No marker display 95% area marker 93% area marker 90% area marker 80% area marker 89% area marker (TYPE1) 88% area marker (TYPE2) This area marker can be varied in 1% increments in the range between 80% to 95%. Values of 93% and 88% for TYPE1 MARKER TYPE indicate area markers whose height is 93.1% and 89.5%, respectively, of available screen height in the selected aspect ratio. (The factory default is 85%.) Selects the background brightness around the marker. Normal background 50% background brightness 0% background brightness (black) Displays/turns off the center marker. Turns the display off Turns the display on *1 This setting is turned "ON" when receiving marker control in REMOTE operation. (GPI, if set, has priority.) *2 These settings are disabled when the GPI function ( page 48) is used to control the marker setting. They are also disabled in split screen mode. *3 This setting is enabled only for HD and SD signal input in 16:9 aspect ratio mode. *4 TYPE1 and TYPE2 area marker size depends on the "MARKER TYPE" setting ( page 23). 22