Panasonic BT-LH2550 Operating Instructions - Page 27
Sub menu, Settings, Description, I-P MODE, ANAMO, SD ASPECT, COLOR GAIN R, COLOR GAIN G, COLOR GAIN
View all Panasonic BT-LH2550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Main Menu (continued) Sub menu Settings Description I-P MODE*2*6 MODE2 MODE1 Selects IP conversion mode. ( page 27, "IP mode") Both the main window and sub-window can be set up in the split-screen display of the "TWO WINDOW" function. Inter-field interpolation Inter-frame interpolation MONO*2 OFF ON Switches between color and monochrome (MONO). Color Monochrome • When ON, the CHROMA setting of the picture/volume adjusting menu is fixed at 0. ANAMO*2*8 OFF ON With an Anamo lens and HD-SDI input, the picture is resized to Anamo magnification (the vertically enlarged signal can be vertically compressed and corrected for display). This function is not available in the split screen display of the "TWO WINDOW" function. SD ASPECT*2 4:3 16:9 Sets the aspect ratio for SD signal input. This function is not available in the split screen display of the "TWO WINDOW" function. 4:3 display 16:9 display SCAN*2 NORMAL UNDER Sets under-scan and normal display. This function is not available in the split screen display of the "TWO WINDOW" function. Normal display Under-scan COLOR GAIN R 0 - 30 Fine tunes R component GAIN in split-screen mode and sub-window display (single screen) of the "TWO WINDOW" function. COLOR GAIN G 0 - 30 Fine tunes G component GAIN in sub-window input in the split-screen display and sub-window display (single screen) of the "TWO WINDOW" function. COLOR GAIN B 0 - 30 Fine tunes B component GAIN in sub-window input in the split-screen display and sub-window display (single screen) of the "TWO WINDOW" function. *2 These functions are not available when "RGB-COMP." under "YPBPR/RGB" or "DVI-COMP." under "DVI-D" is selected in the "INPUT SELECT" menu ( page 36). The gamma curve is set to STANDARD when "RGBCOMP" or "DVI-COMP" is selected. Selecting WIDE1 to 3 for "COLOR SPACE" produces the gamma curve fixed to that "COLOR SPACE." *6 To use the "TWO WINDOW" ( page 34) function, 1) Change settings after exiting the "TWO WINDOW" function. 2) It is recommended to use "MODE2" for handling fast video. *8 "SCAN" changes are not reflected in Anamo size display. IP mode "MODE1" performs IP conversion using inter-frame interpolation. The factory default is "MODE1". "MODE2" performs IP conversion using inter-field interpolation. Since interpolation is performed inside each field, this mode is suitable for checking interlace status. 27