Panasonic CF-19CDBAXVM Service Manual - Page 48
Assembly of Main PCB
UPC - 092281864785
View all Panasonic CF-19CDBAXVM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
n Assembly of Main PCB Process in the order of 1 2 3 4. MDC Basteraid 0 1mm 0 1mm Modem Tape Modem Cable Connect to the MDC connector. Fold the Tape in half. Fold back Basteraid 0 1mm 0 1mm Cover the Screw head If one screw is supplied, insert into the DIMM lower slot. MODEM PCB Set If two screws are supplied, insert into the DIMM upper and lower slots. Fix the Screw (#5) from the back side. Coin Battery Preparation Coin Battery Sub material (19mm width x 3 cm) Hexsagon Spacer H4.2 Wrap 10 3 mm 0 1mm Sheet Attach it on the board before setting the Coin Battery. 0 1mm Screw MDC Assy Screw LAN Cable Screw Screw CPU Sheet Do not cover the screw hole when setting the Coin Battery. DIMM SLOT Avoid coming over the horizontal line of the cross mark on the board. DIMM Assy 9-27