Panasonic CF-19CHGACJM Reference Manual - Page 39
Correcting the Battery Display Battery Recalibration, Connect the AC adaptor.
UPC - 092281871011
View all Panasonic CF-19CHGACJM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Battery Power 39 Correcting the Battery Display (Battery Recalibration) The "Battery Recalibration" function measures and memorizes the battery capacity. To correct the battery display, use this function to fill the battery and then discharge it completely. Perform the procedure at least once immediately after purchasing the computer. Normally the interval of battery recalibration is 3 months. The battery display may not be correct when the battery pack deteriorates after a long time use. In this case, perform the procedure again. 1 Connect the AC adaptor. 2 Close all the applications. 3 Perform "Battery Recalibration". A Click (Start)*4 - [All Programs] - [Panasonic] - [Battery] - [Battery Recalibration]. B When the confirmation message appears, click [Start]. Frequent recalibration of the battery can degrade the battery. A caution message appears when the battery recalibration is performed at the shorter interval than approximately a month. In this case, cancel the battery recalibration. C When the message requests shut down of Windows, click [Yes]. The battery recalibration starts. After the battery pack is fully charged, discharging starts. When the discharging is completed, the power goes off automatically. After the battery recalibration is finished, normal charging starts. *4 Windows XP: [start] NOTE The temperature range should be 10°C to 30°C {50°F to 86°F}. The battery recalibration may take a long time due to the large battery capacity. This is not a malfunction. • Full charge: Approximately 3.5 hours (max.) • Complete discharge: Approximately 3.0 hours If the computer is turned off during the battery recalibration (e.g., due to power failure, or accidental removal of the AC adaptor and battery pack), the battery recalibration will not be completed. You can also perform the battery recalibration with the following procedure. A Restart the computer. B Press and hold F9 while the [Panasonic] boot screen is displayed just after the computer starts the startup proce- dure. C When the remaining battery capacity is displayed, press Enter. D Follow the on-screen instructions.