Panasonic CF-52GUNBX2M Operating Instructions - Page 13

Insert the battery pack., Connect your computer to a power outlet., Turn on the computer.

Page 13 highlights

Troubleshooting Useful Information Getting Started „ Opening the Display A 2 1 A Pull the carrying handle forward. 3 B Push the top of the latch (A) to release it. C Lift up the display to open. 1 Insert the battery pack. z Do not touch the terminals of the battery pack and the computer. Doing so can make the terminals dirty or damaged, and may cause malfunction of the battery pack and the computer. z Be sure to attach the cover for use. 2 Connect your computer to a power outlet. The battery charging starts automatically. CAUTION z Do not disconnect the AC adaptor and do not switch the wireless switch to on until the first-time operation procedure is completed. z When using the computer for the first time, do not connect any peripheral device except the battery pack and AC adaptor. z Handling the AC adaptor Problems such as sudden voltage drops may arise during periods of thunder and lightning. Since this could adversely affect your computer, an uninterruptible power source (UPS) is highly recommended unless running from the battery pack alone. 3 Turn on the computer. A Confirm the wireless switch (Î page 10) is OFF. B Press and hold the power switch (Î page 10) for approximately one second until the power indicator (Î page 10) lights. CAUTION z Do not press the power switch repeatedly. z The computer will be forcibly turned off if you press and hold the power switch for four seconds or longer. z Once you turn off the computer, wait for ten seconds or more before you turn on the computer again. z Do not perform the following operation until the drive indicator turns off. • Connecting or disconnecting the AC adaptor • Pressing the power switch • Touching the keyboard, touch pad or external mouse • Closing the display • Turn on/off the wireless switch z When the CPU temperature is high, the computer may not start up to prevent overheating of the CPU. Wait until the computer cools down, and then turn the power on again. If the computer does not power on even after cooling down, contact Panasonic Technical Support (Î page 33). Appendix 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

13
Getting Started
Useful Information
Troubleshooting
Appendix
Opening the Display
Do not touch the terminals of the battery pack and the computer. Doing so can
make the terminals dirty or damaged, and may cause malfunction of the battery
pack and the computer.
Be sure to attach the cover for use.
The battery charging starts automatically.
CAUTION
Do not disconnect the AC adaptor and do not switch the wireless switch to on
until the first-time operation procedure is completed.
When using the computer for the first time, do not connect any peripheral
device except the battery pack and AC adaptor.
Handling the AC adaptor
Problems such as sudden voltage drops may arise during periods of thunder
and lightning. Since this could adversely affect your computer, an uninterrupt-
ible power source (UPS) is highly recommended unless running from the bat-
tery pack alone.
A
Confirm the wireless switch (
page 10) is OFF.
B
Press and hold the power switch
(
page 10) for approximately one
second until the power indicator
(
page 10) lights.
CAUTION
Do not press the power switch repeatedly.
The computer will be forcibly turned off if you press and hold the power switch
for four seconds or longer.
Once you turn off the computer, wait for ten seconds or more before you turn on
the computer again.
Do not perform the following operation until the drive indicator
turns off.
Connecting or disconnecting the AC adaptor
Pressing the power switch
Touching the keyboard, touch pad or external mouse
Closing the display
Turn on/off the wireless switch
When the CPU temperature is high, the computer may not start up to prevent
overheating of the CPU. Wait until the computer cools down, and then turn the
power on again. If the computer does not power on even after cooling down,
contact Panasonic Technical Support (
page 33).
A
Pull the carrying handle forward.
B
Push the top of the latch (A) to release it.
C
Lift up the display to open.
A
1
2
3
1
Insert the battery pack.
2
Connect your computer to a power outlet.
3
Turn on the computer.