Panasonic CQ5109U CQ5109U User Guide - Page 17

Category setting, Channel selection, Channel preset, Selection by category, Display change

Page 17 highlights

4 Repeat the steps 2 and 3 to enter a 4-digit number code. When a 4-digit number code is correctly entered and [BAND] is finally pressed, the all locked channels are unlocked and start to be received. (Once turns ACC ON/OFF, the channels return to previous locked status) Notes: ¡If a wrong number code is entered when selects a locked channel, "WRONG CODE" is displayed and returns to Channel 1. ¡If 10 seconds elapse before determining the entry of the number code, "TIME OUT" is displayed and returns to previous channel. ¡To exit the passcode entry, press [DISP] and returns to previous channel. ¡To change the parental lock passcode, refer to page 19 for setting. Channel preset Up to 6 channels can be preset in SXM1 to SXM3 respectively. 1 Use manual or seek tuning to tune into a channel. 2 Press and hold one of the preset buttons [1] through [6] until the display blinks once. Preset Number blinks once Note: New channels overwrite existing saved channel after this procedure. Preset channel selection Press the corresponding preset button [1] through [6] to tune in a preset channel. Selection by category Category setting You can toggle the category selection mode ON and OFF every time you press and hold [BAND] for more than 2 seconds. If the category is set to ON, the unit operates as follows for each button: Notes: ¡When category is set to ON, the letter "c" is displayed followed by channel number. ¡When category selection mode is active, as indicated by "c", the preset buttons are disabled. Turn off category selection mode to re-enable the preset buttons. Category selection [FOLDER }]: Next category [FOLDER {]: Preceding category Channel selection [TUNE/SEEK }]: Next available/subscribed channel in current category [TUNE/SEEK {]: Preceding available/subscribed channel in current category Note: The simulate category of "All Channel" is selectable in category selection. Display change Press [DISP] (Display) to change the display of different metadata information. Band/ channel number (Data reading) Channel name (Default) (Data reading) Artist name (Data reading) Song title (Data reading) Information of contents (Data reading) Category name Clock Note: "- - - -" is displayed when there is no information on the selected channel. 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

17
4
Repeat the steps
2
and
3
to enter a 4-digit
number code.
When a 4-digit number code is correctly entered
and
[BAND]
is finally pressed, the all locked
channels are unlocked and start to be received.
(Once turns ACC ON/OFF, the channels return to
previous locked status)
Notes
:
¡
If a wrong number code is entered when selects a
locked channel, “WRONG CODE” is displayed and
returns to Channel 1.
¡
If 10 seconds elapse before determining the entry
of the number code, “TIME OUT” is displayed and
returns to previous channel.
¡
To exit the passcode entry, press
[DISP]
and
returns to previous channel.
¡
To change the parental lock passcode, refer to
page 19 for setting.
Channel preset
Up to 6 channels can be preset in SXM1 to SXM3
respectively.
1
Use manual or seek tuning to tune into a
channel.
2
Press and hold one of the preset buttons
[1]
through
[6]
until the display blinks
once.
Preset Number
blinks once
Note
: New channels overwrite existing saved chan-
nel after this procedure.
Preset channel selection
Press the corresponding preset button
[1]
through
[6]
to tune in a preset channel.
Selection by category
Category setting
You can toggle the category selection mode ON and
OFF every time you press and hold
[BAND]
for
more than 2 seconds. If the category is set to ON,
the unit operates as follows for each button:
Notes
:
¡
When category is set to ON, the letter “c” is
displayed followed by channel number.
¡
When category selection mode is active, as
indicated by “c”, the preset buttons are disabled.
Turn off category selection mode to re-enable the
preset buttons.
Category selection
[FOLDER
}
]
: Next category
[FOLDER
{
]
: Preceding category
Channel selection
[TUNE
/
SEEK
}
]
: Next available/subscribed
channel in current cat-
egory
[TUNE
/
SEEK
{
]
: Preceding available/sub-
scribed channel in current
category
Note
: The simulate category of “All Channel” is
selectable in category selection.
Display change
Press
[DISP]
(Display) to change the display
of different metadata information.
Band/
channel number
(Data reading)
(Data reading)
(Data reading)
(Data reading)
(Data reading)
Channel name
(Default)
Artist name
Song title
Information of
contents
Category name
Clock
Note
: “– – – –” is displayed when there is no infor-
mation on the selected channel.