Panasonic CQ5109U CQ5109U User Guide - Page 29
Installation Guide
View all Panasonic CQ5109U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Installation Guide WARNING p This installation information is designed for professional installers with knowledge of automobile electrical safety systems and is not intended for non-technical, do-it-yourself individuals. It does not contain instructions on the electrical installation and avoidance of potential harm to air bag, anti-theft and ABS braking or other systems necessary to install this product. Any attempt to install this product in a motor vehicle by anyone other than a professional installer could cause damage to the electrical safety system and could result in serious personal injury or death. p If your car is equipped with air bag and/or anti-theft systems, specific procedures may be required for connection and disconnection of the battery to install this product. Before attempting installation of this electronic component against the manufacturer's recommendation, you must contact your car dealer or manufacturer to determine the required procedure and strictly follow their instructions. FAILURE TO FOLLOW THE PROCEDURE MAY RESULT IN THE UNINTENDED DEPLOYMENT OF AIR BAGS OR ACTIVATION OF THE ANTI-THEFT SYSTEM RESULTING IN DAMAGE TO THE VEHICLE AND PERSONAL INJURY OR DEATH. Overview This product should be installed by a professional. However, should you decide to install the product against the manufacturer's recommendation, these operating Instructions do not contain electrical installation instructions. You must contact your car dealer or manufacturer for electrical connection instructions to avoid possible damage to your electrical safety systems and resulting injury or death. (Please refer to the "WARNING" statement above). Your next step is to decide where to install the unit. The instructions in these pages will guide you through the remaining steps: ¡Identify and label the car wires. ¡Connect the vehicle wires to the wires of the power connector. ¡Install the unit in the dashboard. ¡Check the operation of the unit. If you encounter problems, please consult your nearest professional installer. Before you begin installation, look for the following items which are packed with your unit. ¡Operating Instructions ¡Installation hardware .....Needed for Installation. Dashboard specifications Thickness Min. 4.75 mm {3/16"} Max. 5.56 mm {7/32"} 53 mm {2-3/32"} 182 mm {7-5/32"} Warning This unit operates with a 12 V DC negative @ ground auto battery system only. Do not attempt to use it with any other system. Doing so could cause serious damage. 29