Panasonic CQ5109U CQ5109U User Guide - Page 19
Parental lock setting mode, Function settings continued
View all Panasonic CQ5109U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Function settings (continued) Parental lock setting mode This function disables the audience from selecting the locked channel. 1 Press and hold [SEL] for more than 2 seconds to open SXM function setting screen. 2 When "D. TUNING" is displayed, press [SEL] to select parental lock setting mode. (Parental lock setting mode) 3 Enter a 4-digit passcode, then press [BAND] when finished. OR To set parental lock ON/OFF: 4 Press [SEL] to open lock ON/OFF mode after step 3. 5 Turn [SEL] to switch between lock ON or OFF. (Default) 6 When done selecting the parental lock ON/OFF setting, press [SEL] to exit the function setting mode. q Press [d] or [s] to select a number. w Press [BAND] to shift to the right adjacent digit. A digit where entry is determined is indicated as "*". e Repeat the steps q and w to enter a 4-digit number. Note: (Default: 1111). If you want to initialize the passcode, press and hold [DISP] for more than 10 seconds while passcode entry, the 4-digit passcode will return to the default. 4 Press [TUNE/SEEK }] or [TUNE/SEEK {] to select a channel. 5 Press [BAND] to switch a select channel to be locked or unlocked. unlocked locked Note: Channel 0 (CH 0) and Channel 1 (CH 1) can not be locked. 6 When done selecting the locked channels, press [DISP] to exit the function setting or press [SEL] to change the parental lock ON/OFF setting. OR To change the parental lock passcode: 4 Press and hold [BAND] for more than 2 seconds after step 3. (New code entry mode) 5 Enter a new 4-digit code, then press [BAND] when finished. q Press [d] or [s] to select a number. w Press [BAND] to shift to the right adjacent digit. A digit where entry is determined is indicated as "*". e Repeat the steps q and w to enter a 4-digit number. 6 Repeat step 5 to confirm the new code. "CODE SET" is displayed for 2 seconds and the new code setting is finished, then returns to channel locked/unlocked setting display. 19