Panasonic CQC1100U CQC1100U User Guide - Page 13

E N G Maintenance L I S H 13 ❐ Cleaning this Unit Use a dry, soft cloth to wipe. Care of the Unit ❐ Caution on Cleaning Never use solvents such as benzine, thinner as they may mar the surface of the unit. Notes on discs Do not play any ordinary music CDs with labels other than this one. How to hold the disc • Do not touch the underside of the disc. • Do not scratch the discs. • Do not bend disc. • When not in use, keep the disc in the case. Do not use irregularly shaped discs. Do not leave discs in the following places: • Direct sunlight • Near car heaters • Dirty, dusty and damp areas • On seats and dashboards Disc cleaning Use a dry, soft cloth to wipe from the center outward. Do not attach any seals or labels to your discs. Do not write on the disc label in a heavy pen or ballpoint pen stroke. Label side Do not use irregularly shaped discs. Notes on CD-Rs/RWs • You may have trouble playing back some CD-R/RW discs recorded on CD recorders (CD-R/RW drives), either due to their recording characteristics or dirt, fingerprints, scratches, etc. on the disc surface. • CD-R/RW discs are less resistant to high temperatures and high humidity than ordinary music CDs. Leaving them inside a car for extended periods may damage them and make playback impossible. • The unit may not successfully play back a CD-R/RW that was made by the combination of writing software, a CD recorder (CD-R/RW drive) and a disc if they are incompatible one another. • This player cannot play the CD-R/RW discs if the session is not closed. • This player cannot play the CD-R/RW discs which contains other than CD-DA data. • Be sure to observe the instructions of CD-R/RW disc for handling it. 24 CQ-C1200U/C1120U/C1110U/C1100U Installation E N G L I S WARNING H 14 ❐ This installation information is designed for experienced installers and is not intended for non-technical individuals. It does not contain warnings or cautions of potential dangers involved in attempting to install this product. Any attempt to install this product in a motor car by anyone other than a qualified installer could cause damage to the electrical system and could result in serious personal injury or death. ❐ If your car is equipped with air bag and/or anti-theft systems, specific procedures may be required for connection and disconnection of the battery to install this product. Before attempting installation of this electronic component, contact your car dealer or manufacturer to determine the required procedure and strictly follow their instructions. FAILURE TO FOLLOW THE PROCEDURE MAY RESULT IN THE UNINTENDED DEPLOYMENT OF AIR BAGS OR ACTIVATION OF THE ANTI-THEFT SYSTEM RESULTING IN DAMAGE TO THE VEHICLE AND PERSONAL INJURY. ❐ Overview This product should be installed by a professional. However, if you plan to install this product yourself, your first step is to decide where to install it. The instructions in these pages will guide you through the remaining steps: (Please refer to the "WARNING" statement above.) • Identify and label the car wires. • Connect the car wires to the wires of the power connector. • Install the unit in the dashboard. • Check the operation of the unit. If you encounter problems, please consult your nearest professional installer. Caution: This unit operates with a 12 V DC negative ground auto battery system only. Do not attempt to use it in any other system. Doing so could cause serious damage. Before you begin installation, look for the items which are packed with your unit. • Warranty Card...Fill this out promptly. • Panasonic Servicenter List for Service Directory ...Keep for future reference in case the product needs servicing. • Installation Hardware...Needed for in-dash installation. ❐ Required Tools You'll need a screwdriver, a 1.5 V AA battery, and the following: 12 V DC Test bulb Electrical tape Side-cut pliers ❐ Dashboard Specifications Thickness Min. 3⁄ " (4.75 mm) 16 Max. 7⁄ " (5.56 mm) 32 23⁄ " (53 mm) 32 75⁄ " (182 mm) 32 25 CQ-C1200U/C1120U/C1110U/C1100U