Panasonic DC-100D Owners Manual - Page 150

6. Focus/Zoom • On the recording screen, you can rotate the focus ring to display the MF Assist screen. If the focus ring has been rotated to enlarge the display, the assist screen will be exited a certain amount of time after you cease the operation. • The recording distance reference mark is a mark used to measure the recording distance. Use this when taking pictures with manual focusing or taking close-up pictures. • When using an interchangeable lens with no focus ring and in the following cases, manual focus operations may not be possible during recording if the shutter speed is very slow. - [ ] mode (When [Exposure Mode] is set to [M]) - [ ] mode (When [S&Q Exposure Mode] is set to [M]) (When using an interchangeable lens with a focus ring, you can do manual focus operations, but autofocus does not work during manual focus.) • MF Assist and MF Guide may not display depending on the lens used. You can, however, display MF Assist by directly operating the camera using the touch screen or a button. • You can memorize the MF Assist position separately for vertical and horizontal orientations Focus Switching for Vert / Hor] (335) • You can set the movement of the MF Assist position to loop Loop Movement Focus Frame] (335) • You can change the display method of the magnified screen MF Assist] (336) • You can disable focus ring operation Focus Ring Lock] (339) • You can change the Focus Peaking sensitivity and the display method Peaking] (342) • You can change the MF Guide display MF Guide] (345) • The camera memorizes the focus point when you turn it off Lens Position Resume] (348) 150