Panasonic DMCLC80PP Digital Still Camera - Page 46
Taking Pictures Using Burst Mode
View all Panasonic DMCLC80PP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Recording pictures (basic) Taking Pictures using Burst Mode Preparation • Set the mode dial except for [ ]/[ ]. (P29) 1 Switch the burst mode setting. 1600 19 H • In the following cases, the burst speed becomes slow due to the signal processing, however, this is not a malfunction of the camera. (a) When you take pictures in a dark place. (b) When you use the camera in high temperature locations. The number of pictures taken at a time is not limited in the above cases. • When the ISO sensitivity is set to [ISO400], you cannot use the burst mode. (DMC-LC80) ª Number of pictures recorded in burst mode H : High speed ; L : Low speed ; No display (canceled) 2 Take pictures. Burst speed Number of (pictures/ recordable second) pictures (pictures) H L DMCLC80 2.7 (°1) 1.5 max. 5 max. 9 DMC- 3.3 LC70 (°1) max. 3 max. 5 2 (°2) / (°2) / max. 5 max. 10 • Keep pressing the shutter button fully to activate the burst mode. ¬Suggestions/Tips ¬ • If the flash is activated, you can record only 1 picture. • In Simple mode [ ], the burst speed is fixed to Low. (P34) • You cannot take pictures with audio in the burst mode. • When setting auto bracket and the burst mode simultaneously, auto bracket will be performed. • Burst mode will not perform as described if a MultiMediaCard is used in place of an SD Memory Card. The reading/writing speed of a MultiMediaCard is slower than that of an SD Memory Card. 46 DMC- 3.5 LC50 (°1) max. 8 2 max. 5 (°3) / max. 10 °1 When the shutter speed is faster than 1/60 and the flash is not activated. °2 2304k1728 picture size °3 2048k1536 picture size