Panasonic DMP BD35 Blu-ray Dvd Player - Multi Language - Page 31
To select these options, perform steps, Dolby D/Dolby D
UPC - 037988257188
View all Panasonic DMP BD35 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
To select these options, perform steps 1-4 (> 30) "Video" Still Mode (paused video) [BD-V] [AVCHD] [DVD-V] Select the type of picture shown when you pause playback (> 46, Frames and fields). Seamless Play [DVD-VR] Select the play mode between playlist chapter segments and partially deleted titles. Black Level Control Select lighter or darker for adjusting the black level control to the desired setting for picture enhancement. ≥Auto ≥Field: Select if jittering occurs when "Auto" is selected. (The picture is coarser.) ≥Frame: Select if small text or fine patterns cannot be seen clearly when "Auto" is selected. (The picture is clearer and finer.) ≥On: The chapters in playlists are played seamlessly. This does not work while searching or when there are several audio types included on the playlist. Additionally, the positioning of chapter segments may change slightly. ≥Off: The points where chapters in playlists change are played accurately, but the picture may freeze for a moment. ≥Lighter: When video is output from VIDEO OUT terminal. ≥Darker: When video is output from COMPONENT VIDEO OUT terminal. "Audio" Dynamic Range Compression [BD-V] [AVCHD] [DVD-V] [DivX] (Dolby Digital, Dolby Digital Plus and Dolby TrueHD only) Change the dynamic range (> 46) for late night viewing. Digital Audio Output (> 8) ≥Press [OK] to show the following settings. Dolby D/Dolby D +/ Select whether Dolby Digital, Dolby Dolby TrueHD Digital Plus, Dolby TrueHD, DTS DTS/DTS-HD Digital Surround, DTS-HD High Resolution Audio or DTS-HD Master Audio is output in "Bitstream" or "PCM" format. ≥Not making the proper settings may result in noise. ≥If the unit is connected with the HDMI AV OUT terminal, the specifications of the connected equipment take preference over this unit and audio selected in these items may not be output (e.g., when a television is connected, the HDMI audio output of this unit is limited to down-mixed 2ch.) BD-Video Secondary Audio [BD-V] Turn on/off the clicking sound on the menu and audio with secondary video in picture-in-picture mode. (> 21) PCM Down Conversion Select how to output audio with a sampling frequency of 96 kHz or more. ≥Signals are converted to 48 kHz despite the settings across in the following cases: - when the signals have a sampling frequency of over 96 kHz - when the disc has copy protection - when "BD-Video Secondary Audio" is set to "On" Downmix Switch the downmix system for playing back multi-channel surround sound. ≥When "Dolby D/Dolby D +/Dolby TrueHD" or "DTS/DTS-HD" is set to "Bitstream", there are no downmix effects for the outputted audio. ≥The audio will be outputted in "Stereo" in the following cases. - AVCHD playback - Playback of clicking sound on the menu and audio with secondary video in picture-in-picture mode ≥On ≥Off ≥Auto: Effective only when Dolby TrueHD is played. ≥Bitstream: Select "Bitstream" when the connected equipment can decode the respective audio format. - Connect equipment supporting HDMI (High Bit rate Audio) and use a High Speed HDMI Cable in order to output high bit rate audio such as Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio or DTS-HD Master Audio. ≥PCM: Select "PCM" when the connected equipment cannot decode the respective audio format. Refer to the operating instructions for connected devices to verify whether or not they can decode each of the audio formats. ≥On: ≥Off: ≥On: ≥Off: The primary audio and secondary audio are mixed and output. The sampling frequency is converted to 48 kHz. The clicking sound on the menu and secondary audio are not output. Signals are converted to 48 kHz. (Choose when the connected equipment cannot process signals with sampling frequency of 96 kHz.) Signals are output as 96 kHz. (Choose when the connected equipment can process signals with sampling frequency of 96 kHz.) ≥Stereo: When connected to equipment that does not support the virtual surround function. ≥Surround encoded: When connected to equipment that supports the virtual surround function (Dolby Pro Logic, DTS Neo: 6, etc.). Settings 31 RQT9243 or RQT9350