Panasonic DMP-BD70 Owners Manual - Page 33
Audio, Display
View all Panasonic DMP-BD70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
To select these options, perform steps 1-4 (> 32) "Audio" Dynamic Range Compression [BD-V] [AVCHD] [DVD-V] (Dolby Digital, Dolby Digital Plus and Dolby TrueHD only) Change the dynamic range (> 50) for late night viewing. Digital Audio Output (> 8) ≥Press [OK] to show the following settings. ≥On ≥Off ≥Auto: Effective only when Dolby TrueHD is played. Dolby D/Dolby D +/ Dolby TrueHD DTS/DTS-HD Select whether Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS Digital Surround, DTS-HD High Resolution Audio or DTS-HD Master Audio is output in "Bitstream" or "PCM" format. ≥Not making the proper settings may result in noise. ≥If the unit is connected with the HDMI AV OUT terminal, the specifications of the connected equipment take preference over this unit and audio selected in these items may not be output (e.g., when a television is connected, the HDMI audio output of this unit is limited to down-mixed 2ch.) ≥Bitstream: Select "Bitstream" when the connected equipment can decode the respective audio format. - Connect equipment supporting HDMI (High Bit rate Audio) and use a High Speed HDMI Cable in order to output high bit rate audio such as Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio or DTS-HD Master Audio. ≥PCM: Select "PCM" when the connected equipment cannot decode the respective audio format. Refer to the operating instructions for connected devices to verify whether or not they can decode each of the audio formats. BD-Video Secondary Audio [BD-V] Turn on/off the button click sound on the menu and audio with secondary video in picture-in-picture mode. (> 23) ≥On: ≥Off: The primary audio and secondary audio are mixed and output. The sampling frequency is converted to 48 kHz. The button click sound on the menu and secondary audio are not output. PCM Down Conversion Select how to output audio with a sampling frequency of 96 kHz. ≥Signals are converted to 48 kHz despite the settings across in the following cases: - when the signals have a sampling frequency of 192 kHz - when the disc has copy protection - when "BD-Video Secondary Audio" is set to "On" ≥On: ≥Off: Signals are converted to 48 kHz. (Choose when the connected equipment cannot process signals with sampling frequency of 96 kHz.) Signals are output as 96 kHz. (Choose when the connected equipment can process signals with sampling frequency of 96 kHz.) Downmix Switch the downmix system for playing back multi-channel surround sound. ≥When "Dolby D/Dolby D +/Dolby TrueHD" or "DTS/DTS-HD" is set to "Bitstream", there are no downmix effects for the outputted audio. ≥The audio will be outputted in "Stereo" in the following cases: - AVCHD playback - Playback of button click sound on the menu and audio with secondary video in picture-in-picture mode ≥Stereo: When connected to equipment (e.g., TV) that does not support the virtual surround function. ≥Surround encoded: When connected to equipment that supports the conversion from 2 channels to multi channel surround. "Display" Status Messages Choose whether to show status messages automatically. On-screen Language Choose the language for these menus and on-screen messages. ≥Automatic ≥English ≥Off ≥Français ≥Español Screen Saver Function This is to prevent burn-in on the screen. ≥Regardless of the setting, the screen switches to Screen Saver mode if there is no operation for 2 minutes after starting the playback of CD or MP3. (Playback continues.). FL Display Changes the brightness of the unit's display. ≥On: (Screen Saver Function is enabled after 10 minutes of no activity) - When the movie title being played was created in 4:3 display mode the masked-off area on the screen becomes gray to prevent screen burning. (The screen saver will not be activated if the movie was created in 16:9 display mode.) [When connecting with an HDMI cable, "TV Aspect" (> 34) is set to "16:9" and "HDMI Resolution" (> 34) is set to any mode other than "480p", or when connecting with a component video cable, "TV Aspect" (> 34) is set to "16:9" and "Component Video Resolution" (> 34) is set to "720p" or "1080i".] - When the Direct Navigator or FUNCTIONS menu is displayed, the display returns to the screen saver mode. - When still pictures are shown (except for slideshow), the display returns to the Direct Navigator screen. ≥Off ≥Bright ≥Dim: ≥Auto: The display is dimmed. The display is dimmed during playback and is bright except during playback. SD Card LED Control Set the lighting method for the lamp on the SD card slot. ≥On ≥SD inserted: ≥Off When this unit is turned on and SD card is inserted, the lamp is lighted. License Information about the software used by this unit is displayed. 33 Settings RQT9412