Panasonic DMP-UB300 Owners Manual - Page 18
Firmware updates, If the wireless router supports the PUSH, button method
View all Panasonic DMP-UB300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Getting started Stealth SSIDs will not be displayed; in this case, enter manually in the following order. 1 To display the SSID input screen : Press [HOME] > select "Setup" and press [OK] > select "Player Settings" and press [OK] > select "Network" and press [OK] > select "Network Settings" and press [OK] > select "Wireless Settings" and press [OK] > select "Manual setting" and press [OK] 2 Enter your SSID. If the wireless router supports the PUSH button method*2; You can connect to and configure the security settings of your wireless LAN device with ease by pressing the Link button on the router. If your wireless network is encrypted; Enter your encryption key (password). ≥ You can switch between capital and lower case letters by pressing the "Shift" key. Encryption Key (Password) M Shift 1 2 3 4 5 6 7 8 9 0 Space / : Symbols . Alphanumeric Other Characters Backspace Finish OK RETURN (QWHUFDVHVHQVLWLYH Firmware updates This unit is capable of checking the firmware automatically when connected to the Internet via a broadband connection.*3 When a new firmware version is available, the following message is displayed. Firmware Update 4 New Version: X.XX Current Version: X.XX Do you want to start firmware update? For the update information, please visit the following website: http://panasonic.net/support/ Yes No OK RETURN Select "Yes" to start downloading the firmware. When the firmware update starts after the downloading is finished, a black screen is displayed and the POWER LED flashes rapidly. You cannot operate the unit until the update is complete. Don't remove the AC power supply cord during the update. Removing the AC power supply cord while the update is in progress may damage the unit. After the firmware is installed, unit will restart and the following screen will be displayed. 4 The firmware was updated. Current Version: x.xx ≥ Refer to the owner's manuals of the hub or router. ≥ [UB400] Do not use this unit to connect to any wireless network for which you do not have usage rights. Using these networks may be regarded as illegal access. ≥ If you have trouble getting online on your PC after performing network settings on this unit, perform the network settings on your PC. ≥ [UB400] Please be aware that connecting to a network without encryption may result in the leaking of data such as personal or secret information. *1 An SSID (Service Set IDentification) is a name used by wireless LAN to identify a particular network. Transmission is possible if the SSID matches for both devices. *2 The PUSH button method is a connection method which allows you to set encryption for a wireless LAN connection with ease. You can connect to a wireless LAN network by pressing a certain button on the wireless access point [Link button, WPS (Wi-Fi Protected SetupTM) button, etc.]. ≥ You can also download the latest firmware from the following website and store it to a USB device to update the firmware. http://panasonic.jp/support/global/cs/ (This site is in English only.) The update is complete when the POWER LED stops rapid flashing and starts flashing in a repeating pattern of three flashes. Turn off and on the unit. (> 39) ≥ To show the firmware version on this unit. (> 34, "Firmware Version Information") ≥ Downloading will require several minutes. It may take longer or may not work properly depending on the connection environment. *3 You must agree to the terms of use for the Internet function and the privacy policy. (> 33, "Notice") *4 "X.XX" represents the firmware version number. - 18 -