Panasonic DMP-UB300 Owners Manual - Page 23
Home Network feature, Using Mirroring
View all Panasonic DMP-UB300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Playback ≥ In the following cases, settings are possible using the Setup menu items. - When restricting the use of Network Service (> 33, "Network Service Lock") - When the audio is distorted (> 33, "Audio Auto Gain Control") - When wrong time is displayed (> 33, "Time Zone", "DST") ≥ When using a slow Internet connection, the video may not be displayed correctly. A high speed Internet service with a speed of at least 6 Mbps is recommended. ≥ Be sure to update the firmware as soon as a firmware update notice is displayed on the screen. If the firmware is not updated, you may not be able to use Network Service function properly. (> 18) ≥ Network Service Home Screen is subject to change without notice. ≥ The services through Network Service are operated by their respective service providers, and service may be discontinued either temporarily or permanently without notice. Therefore, Panasonic will make no warranty for the content or the continuity of the services. ≥ Some features of websites or content of the service may not be available. ≥ Some content may be inappropriate for viewers. ≥ Some content may only be available for specific countries and may be presented in specific languages. Home Network feature Before using the following features, be sure to configure the connected equipment on your Home Network. [UB400] Using Mirroring Mirroring is a function which displays a smartphone or tablet's screen on a TV via this unit. Enjoy the content shown on a Miracast®-compatible smartphone or similar device on your large TV screen. ≥ A device that supports the Mirroring function and AndroidTM ver. 4.2 or higher is required. For information on whether the smartphone, etc. supports Mirroring, contact the manufacturer of the device. Player Mirroring compatible device 1 Press [HOME]. 2 Select "Home Network" and press [OK]. 3 Select "Mirroring" and press [OK]. 4 Operate the Mirroring compatible device. ≥ On the device, enable Mirroring and select this unit (DMP-UB400) as the device to be connected. For details, refer to the instructions supplied with the device. To exit from Mirroring Press [HOME]. - 23 -