Panasonic DMPBDT350 DMPBDT300 User Guide - Page 39

Recommended audio output setting The settings of the audio output vary depending on the connected equipment. Refer to the table below and set each of the items. Press [SETUP] > "Audio" > Set each item For details of the each item, refer to page 31. Example of connected equipment Setup menu TV via HDMI*1 Receiver with HD audio*2 decoder via HDMI Receiver without HD audio*2 decoder via HDMI Receiver via COAXIAL or OPTICAL Receiver via analog output*3 "Digital Audio Output" "Dolby D/Dolby D +/Dolby TrueHD" "DTS/DTS-HD" "BD-Video Secondary Audio" "PCM" "PCM" "Off" "Bitstream" "Bitstream" "Off" "PCM" "PCM" "Off" "PCM" "PCM" "Off" No effect No effect "Off" "PCM Down Conversion" No effect No effect No effect "Off"*4 No effect "Downmix" "Stereo" No effect No effect "Stereo"*5 No effect "High Clarity Sound" "Enable" "Disable"*6 "Disable"*6 "Disable"*6 ≥ Because underlined items are the factory presets, it is not necessary to change these settings. *1 If connected to TV via the COAXIAL, OPTICAL or AUDIO OUT terminal, these settings have no effect. *2 HD audio: Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio and DTS-HD Master Audio *3 Set "Analog Audio Output" to "7.1ch" or "2ch (Downmix) + 5.1ch". (Press [SETUP] > TV / Device Connection) *4 If the connected equipment that does not support 96 kHz, set to "On". *5 If the connected equipment that supports the virtual surround function, set to "Surround encoded". *6 When connected to TV via the HDMI terminal for outputting image, set to "Enable". "Disable"*6 Reference 39 VQT2J87 (ENG)