Panasonic DMRE500 DMRE500 User Guide - Page 27
Check, Change Or Delete A Program
View all Panasonic DMRE500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
4 Press [ENTER]. MESSAGES SCHEDULE LISTINGS FAVORITES RECORD Sat 1:00pm NWBG Once R 87 NWBG SP HDD 1:00 1:55 REMOVE FREQUENCY INFO. Sat 2:00pm Dodzilla Once R Sat 3:00pm Bull house Weekly RW Sat 3:30pm Be switched Weekly RW 4/3 4:00pm Baseball Once R Repeat steps 1-4 to program other recordings. ≥As long as the setting is not changed, the program is recorded to the HDD in the recording mode selected by the unit. To change the setting ➡ page 25, To change the setting, steps 3-4. 5 Press [TV GUIDE]. Returns to the television screen. ≥The unit is not off. To save power, turn the unit off by pressing [Í DVD POWER]. ≥When using the cable TV box, make sure the cable TV box is turned on. ∫ To cancel recording when recording has already begun Press [∫], then [ENTER] within 5 seconds. ≥You can also press and hold [∫] on the main unit for more than 3 seconds to stop recording. Check, change or delete a program 1 Press [PROG/CHECK]. MESSAGES SCHEDULE LISTINGS FAVORITES RECORD SET TIMER Sat 1:00pm NWBG Once R Sat 2:00pm Dodzilla Once R Sat 3:00pm Bull house Weekly RW Sat 3:30pm Be switched Weekly RW 4/3 4:00pm Baseball Once R 2 Press [3, 4] to select the program. Channel or program name (a program name that was set for timer recording using TV Guide On ScreenTM system or VCR Plusi system that was listed in the program list) Sat 1:00pm NWBG Once R 87 NWBG SP HDD 1:00 1:55 REMOVE FREQUENCY INFO. Recording mode (➡ page 23) Frequency (➡ page 25, 26) Recording drive ∫ To change the recording frequency Press [CHAPTER] (Green). ∫ To change the time, recording mode and recording drive Press [ENTER]. (➡ page 25, To change the setting, step 4) Recording ∫ To delete the program Press [DUBBING] (Blue). ∫ To exit the screen Press [TV GUIDE]. Returns to the television screen. ≥The unit is not off. To save power, turn the unit off by pressing [Í DVD POWER]. ∫ When there is a duplicate or overlapping program timer recording The program timer recording that was set last is recorded. None of the program that was set earlier is recorded even if there is only partial overlapping. Program timer recordings that are not recorded are highlighted in grey. Time Not recorded Programs set earlier Not recorded Program set last Recorded Notes on timer recording ≥"F" lights on the unit's display to indicate that the unit is in timer recording standby. ≥"F" flashes when the unit cannot go to timer recording standby. ≥Timer recordings are activated regardless of whether the unit is turned on/off. ≥Timer recordings begin when the set time is reached even when recording or when playing. ≥Timer recordings do not begin while transferring (dubbing) in normal speed mode (➡ page 47). ≥When you program successive timer recordings to start immediately one after the other, the unit cannot record the part at the ending of the earlier program (approximately 15 seconds). In addition, when recording to DVD-R, the unit cannot record the part at the beginning of the later program (approximately 15 seconds). Program Program Not recorded [DVD-R] Recorded Recorded Not recorded ≥If you set DST (Daylight Saving Time) to ON when manually setting the clock (➡ page 13), timer recording may not work when summer switches to winter and vice versa. ∫ Relief Recording When the recording drive is set to "DVD" for timer recording and if the program will not fit onto the disc, the recording drive will be changed to the "HDD" automatically. ≥If there is no disc in the tray or the disc cannot be recorded on or when timer recording starts while transferring (dubbing), the recording drive will be changed to the HDD. ≥The Direct Navigator shows which programs were relief- recorded (" " is displayed.)(➡ page 30). ≥If the time remaining on the HDD is insufficient, as much of the program as possible will be recorded onto the HDD. RQT7394 27