Panasonic DVD-S700 DVD-S700 Owner's Manual (English) - Page 11

Operations Changing the player settings Change the unit's settings if necessary. The settings remain intact even if you switch the unit to standby.  Press SETUP.  Press e r to select the menu, and press q.  Press e r to select the item, and press q to confirm your selection.  Press e r to select the settings, and press OK. • To return the previous menu, press w. • To exit, press SETUP. Operation methods other than the above procedure may be displayed. In that case, follow the on-screen instructions. Depending on the type of media, this unit's settings may be disabled. SYSTEM TV System This menu contains the options for selecting the color system that matches the connected TV. NTSC It will change the video signal of a PAL contents and output it to NTSC format. PAL It will change the video signal of an NTSC contents and output it to PAL format. PAL60 It will change the video signal of an NTSC contents and output it to PAL60 format. Auto Select this if the connected TV is compatible with both NTSC and PAL. Screen Saver This setting enables the Screen Saver to activate. Screen saver will start automatically if the media playback is stopped for about 5 minutes. Resolution (DVD-S700 only) Select a video resolution that is compatible with the TV display capability. Selecting "Auto" can automatically select the best resolution. HDMI CEC (DVD-S700 only) When connecting this unit with the TV via the HDMI cable, linked operations with a connected device is possible. TV Type Set the TV Type on the DVD player according to the TV you have connected. 4:3PS 16:9 aspect images are enlarged in full screen with the both sides cut. 4:3LB 16:9 aspect images are displayed with black bands on top and bottom. 16:9 4:3 aspect images are displayed in the center of the screen. 16:9Full 4:3 aspect images are stretched to right and left. LANGUAGE Display This switches the language for display menu. Audio This switches the language for output audio. Subtitle This switches the language for subtitle. Menu This switches the language for disc menu. AUDIO Audio Out (DVD-S700 only) This sets the audio output method when connected to the "HDMI AV OUT" terminal. Bitstream When the connected equipment is supporting Dolby Digital PCM When the connected equipment is not supporting Dolby Digital Dynamic Range Adjusts for clarity even when the volume is low through compressing the range of the lowest sound level and the highest sound level. HDMI CEC protocol / Changing the player settings VQT5C22 11