Panasonic EP3513 EP3513 User Guide - Page 11

Fasten the control panel stand

Page 11 highlights

ASSEMBLY Attaching the Armrests (On Both Right and Left Sides) Use the mark as a guide for insertion. 1. Insert the armrest into the unit. • Markings indicating left-hand and right-hand 1 sides can be found on the inside surface of each armrest. • Make sure the control panel cord does not become pinched when fitting the right armrest onto the unit. Turn screws clockwise to tighten. 2. Fasten the armrest with the attachment screws. 2 • Set the three attachment screws in place first and then tighten them firmly. Use This Screw #6 Allen Key Attachment Screw (M6#16) Connecting the Air Plugs (On Both Right and Left Sides) 1. Insert the air plug. • Push on the air plug until you hear it click into place. 2 Allen Key 1 2. Place the plug cover over top of the air plug and fasten with the screw. Use This Screw Air Plug #2 Attachment Screw Plug Cover (M5#16) Attaching the Control Panel Stand to the Right or Left Armrest Attachment Screw (M6#10) Allen Key 2 1. Decide which side to attach the control panel stand to. 2. Fasten the control panel stand with the attachment screws in four places. • Set the four attachment screws in place first and then tighten them firmly. 1 Use This Screw • Diagram shows attachment to right armrest. #4 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42

1
2
Attachment Screw
(M6
#
16)
Allen Key
9
Allen Key
Attachment Screw
(M6
#
10)
Allen Key
Use This Screw
#
6
Use This Screw
#
2
Use This Screw
#
4
ASSEMBLY
Attaching the Armrests (On Both Right and Left Sides)
Connecting the Air Plugs (On Both Right and Left Sides)
Attaching the Control Panel Stand to the Right or Left Armrest
1. Insert the armrest into the unit.
• Markings indicating left-hand and right-hand
sides can be found on the inside surface of
each armrest.
• Make sure the control panel cord does not
become pinched when fitting the right armrest
onto the unit.
2. Fasten the armrest with the
attachment screws.
• Set the three attachment screws in place first
and then tighten them firmly.
1. Decide which side to attach the
control panel stand to.
2. Fasten the control panel stand with
the attachment screws in four places.
• Set the four attachment screws in place first
and then tighten them firmly.
1. Insert the air plug.
• Push on the air plug until you hear it click into
place.
2. Place the plug cover over top of the
air plug and fasten with the screw.
Use the
mark as
a guide for insertion.
Attachment Screw
(M5
#
16)
Plug Cover
Air Plug
• Diagram shows attachment to right armrest.
Turn screws clockwise
to tighten.
1
2
1
2