Panasonic EW3039S Operating Instructions - Page 23

Storing blood pressure readings Up to 90 readings each can be stored in the memory for two people. sys138 Fig. 11-a 82 Ft:. 92 AA Fig. 11-b • All data is retained even when the batteries go flat or are changed. • When measurements are taken and no date has been set, the date and time will be recorded as"-- --". 1. After measurement has been completed, the mark will be lit up (Fig. 11-a). Press the button for the memory in which you want to save the reading (Fig. 11-b). E.g. A ... Recorded in fria1 •ys138 Fig. 1-c B ... Recorded in M/R 2. Memory storage is completed. 82 tia Pulse. 92 A Sit: (After approx. Fig. 11-d two seconds.) • A total for r> and of 90 readings can be stored in memory (Fig. 11-c, 11-d). Readings over the memory capacity will be recorded over the oldest measurement in memory. • Readings cannot be saved when a • 138 SYS measurement has been unsuccessful (display of the error mark E for blood pressure readings). Readings can be saved, however, when the E mark is displayed for the pulse P Fig. 11-e rate. (After approx. • The memory number, measurement date, and two seconds.) time are alternately displayed in approximately 8328 s" DIA. two seconds. ;22 Pulse A tja 30) (After approx. two seconds.) 22