Panasonic EW3039S Operating Instructions - Page 29
be stopped
View all Panasonic EW3039S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
To change the notification time setting: 1. Press the Set button. (Notification Time 1 will blink.) • To change the setting for Notification Time 2 or 3, press the Adjust button to display Notification Time 2 or 3. 2. Press the Set button twice. The hour value will blink. 3. Press the Adjust button repeatedly to set the desired hour. 4. (1) Press the Set button. The minute value will blink. (2) Press the Adjust button repeatedly to set the desired minute. 5. Press the On/Off and Start button to complete the setting. To cancel the measurement notification sound: 1. Press the Set button. (Notification Time 1 will blink.) • To change the setting for Notification Time 2 or 3, press the Adjust button to display Notification Time 2 or 3. 2. Press the Set button once.The 4 , and on will blink. 3. Press the Adjust button. oFF will be displayed. 4. Press the On/Off and Start button to complete the setting. • When the set time is reached, the measurement notification sound will sound to notify you that it's time to take a measurement. • If the set time is reached in the middle of taking a measurement, the measurement notification sound will not sound. • When the measurement notification sound sounds, it can be stopped by pressing the On/Off and Start button. If the button is not pressed, the sound stops after 1 minute. • If the blood pressure monitor is put into a bag, desk, etc., it may not be possible to hear the measurement notification sound. • Notification Time settings are retained even when the batteries are changed. Advice: If a record table is made of the measurement values taken around the same time, you can easily see your own daily blood pressure changes. 28