Panasonic EY6803 EY6803 User Guide - Page 8
Battery Recycling, Charging, For Appropriate Use of Battery, Ni-MH Battery Pack EY9201, Battery Pack
View all Panasonic EY6803 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Battery Recycling ATTENTION: FOR Ni-MH Battery Packs, EY9201 A nickel metal hydride battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY for information on how to recycle this battery. Shoulder pad • The shoulder strap can be adjusted according to the individual. • Adjust the shoulder pad to the shoulder. • Pull the shoulder strap to make sure it is firmly attached to the main unit of the tool. For Appropriate Use of Battery Pack Ni-MH Battery Pack (EY9201) • Charge the Ni-MH battery fully before storage in order to ensure a longer service life. • The ambient temperature range is between 0°C (32°F) and 40°C (104°F). If the battery pack is used when the battery temperature is below 0°C (32°F), the tool may fail to function properly. In that case, charge the battery until charging is completed for appropriate functioning of the battery. • When battery pack is not in use, keep it away from other metal objects like: paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause sparks, burns or a fire. • When operating the battery pack, make sure the work place is well ventilated. Battery Pack Life The rechargeable batteries have a limited life. If operation time becomes extremely short after recharging, replace the battery pack with a new one. NOTE: Use under extremely hot or cold conditions will reduce operating capacity per charge. Charging NOTE: When you charge the battery pack for the first time, or after prolonged storage, charge it for about 24 hours to bring the battery up to full capacity. Battery charger (EY0110) 1. Plug the charger into the AC outlet. NOTE: Sparks may be produced when the plug is inserted into the AC power supply, but this is not a problem in terms of safety. 2. Insert the battery pack firmly into the charger. Battery pack To AC outlet Battery charger 3. During charging, the charging lamp will be lit. When charging is completed, an internal electronic switch will automatically be triggered to prevent overcharging. • Charging will not start if the battery pack is warm (for example, immediately after heavy-duty operation). The orange standby lamp will be lit until the battery cools down. Charging will then begin automatically. 4. When charging is completed, the charging lamp will start flashing quickly in green color. - -