Panasonic EY6803 EY6803 User Guide - Page 9

5. When in any of the conditions that battery pack is too cool, or the battery pack has not been used for a long time, the charging lamp is lit. In this case charging takes longer to fully charge the battery pack, than the standard charging time. • If a fully charged battery pack is inserted into the charger again, the charging lamp lights up. After several minutes, the charging lamp may flash quickly to indicate the charging is completed. 6. If the charging lamp does not light immediately after the charger is plugged in, or if after the standard charging time the lamp does not go off, consult an authorized dealer. NOTE: • When charging a cool battery pack (below 5°C (41°F)) in a warm place, leave the battery pack at the place and wait for more than one hour to warm up the battery to the level of the ambient temperature. Otherwise battery pack may not be fully charged. • Cool down the charger when charging more than two battery packs consecutively. • Do not insert your fingers into contact hole, when holding charger or any other occasions. CAUTION: To prevent the risk of fire or damage to the battery charger. • Do not use power source from an engine generator. • Do not cover vent holes on the charger and the battery pack. • Unplug the charger when not in use. LAMP INDICATIONS Red Flashing Red Lit Green Flashing Quickly Orange Lit Orange Flashing Charger is plugged into the AC outlet. Ready to charge. Now charging. Charging is completed. Battery pack is warm. Charging will begin when temperature of battery pack drops. Charging is not possible. Clogged with dust or malfunction of the battery pack. V. MAINTENANCE Use only a dry, soft cloth for wiping the unit. Do not use a damp cloth, thinner, benzine, or other volatile solvents for cleaning. VI. ACCESSORIES CAUTION: To prevent the risk of injury, only use accessory or attachment for its stated purpose. Bit adapter •EY9HX403 Drill chuck (Optional accessory) •EY9HX400 -  -