Panasonic F200U Operating Instructions - Page 22

Projecting an image, Selecting the input signal, Positioning the image

Get Panasonic F200U - XGA LCD Projector PDF manuals and user guides
UPC - 791871111598
View all Panasonic F200U manuals
Add to My Manuals
Save this manual to your list of manuals

Page 22 highlights

Projecting an image Selecting the input signal 1. Switch on the connected devices. Press the play button of the required device. 2. Press the INPUT SELECT buttons to select the required input method if needed. See "Switching the input signal" on page 24. The image will be projected on the screen. Positioning the image 1. Open the Front panel cover. 2. Adjust the projected image with the Lens shift lever. See "Lens shift and positioning" on page 16. NOTE: • SIGNAL SEARCH is ON as default and the signal from the connected devices is detected automatically. See "SIGNAL SEARCH" on page 35. 4. Adjust the focus and the projected image size. Turn the Focus lever and Zoom lever to adjust the image. You can confirm the adjusted effect with the TEST PATTERN in OPTION menu. See "TEST PATTERN" on page 36. Focus lever Zoom lever 3. Adjust the angle of the projector. Screw down the Front leg adjusters and adjust the angle vertically. See "Front leg adjusters and throwing angle" on page 15. NOTE: • Do not touch the Air Exhaust port as this may cause burns or injury. • If keystone distortion occurs, see "KEYSTONE" on page 32. • If you adjust the focus, you may need to adjust the size of the image by moving the Zoom lever again. Basic Operation ENGLISH - 22

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
E
NGLISH - 22
Basic Operation
Projecting an image
1.
Switch on the connected devices.
Press the play button of the required device.
2.
Press the
INPUT SELECT
buttons to select the
required input method if needed. See “Switching
the input signal” on page 24.
The image will be projected on the screen.
1.
Open the
Front panel cover
.
2.
Adjust the projected image with the
Lens shift
lever
. See “Lens shift and positioning” on page 16.
3.
Adjust the angle of the projector.
Screw down the
Front leg adjusters
and adjust the
angle vertically.
See “Front leg adjusters and throwing angle” on
page 15.
4.
Adjust the focus and the projected image size.
Turn the
Focus lever
and
Zoom lever
to adjust the
image.
You can confirm the adjusted effect with the
TEST
PATTERN
in
OPTION
menu. See “TEST PATTERN”
on page 36.
Selecting the input signal
NOTE:
•
SIGNAL SEARCH
is
ON
as default and the signal from
the connected devices is detected automatically. See
“SIGNAL SEARCH” on page 35.
Positioning the image
NOTE:
•
Do not touch the
Air Exhaust port
as this may cause
burns or injury.
•
If keystone distortion occurs, see “KEYSTONE” on
page 32.
•
If you adjust the focus, you may need to adjust the size
of the image by moving the
Zoom lever
again.
Focus lever
Zoom lever