Panasonic F200U Operating Instructions - Page 33

POSITION menu Q 16:9 The squeezed signal will be projected in 16:9 ratio. Q S4:3 The input signal will be sized down 75 % and projected. S4:3 mode is effective when projecting 4:3 image on to a 16:9 screen. RESIZING When the input signal resolution is lower than the projector resolution, it will be projected at the projector resolution. You can deactivate the RESIZING and project the lower resolution input signal at its original resolution. Press I H to select the required setting. ON Active OFF Deactive NOTE: • Usually the recommended setting is ON. • When the RESIZING is set to ON, the lower resolution input signal may be projected in less quality. When the RESIZING is set to OFF; • The size of the image will be projected smaller and you may need to adjust ZOOM and FOCUS, or the projector position backwards and forwards. • DIGITAL ZOOM, KEYSTONE and INDEX-WINDOW are not available. Q AUTO The S1 signal which contains an identifying signal will be detected and automatically project the image in proper ratio. (Available with S-VIDEO signals only) NOTE: • If you project an image with an unmatched aspect ratio, the image may distort or some portions may be cropped. Select an aspect ratio which preserves the intention of the image creator. • The order of ASPECT types is defined not only by the input method but also by the input signals. See "List of compatible signals" on page 44. • If you project a copyrighted image enlarged or distorted by using ASPECT function in commercial use in a public place, such as a restaurant or hotel, you might infringe on the copyright of the creator which is protected by copyright law. FRAME LOCK If the projected image is degraded, you can activate FRAME LOCK for synchronization. Press I H to select the required option. OFF Deactive ON Active NOTE: • This function is available with some of the COMPUTER signals only. Settings ENGLISH - 33