Panasonic FV-05-11VK1 Installation Instructions - Page 11

WARNING Disconnect power source before working on unit. CAUTION Routine maintenance must be done every year. Please wear gloves during the cleaning work. Never use gasoline, benzene, thinner or any other such chemicals for cleaning the ventilating fan. Do not immerse motor in water when cleaning. Do not soak resin parts in water over 140°F (60°C). 1. Remove grille by pulling down one mounting spring (Fig.15), then pull down the other. (For models plug-in FV-MSVK1 or FV-NLVK1: Pull down the mounting spring that without lead wire passed side, and remove motion sensor or LED night light as shown in Fig.16) (Squeeze mounting spring and pull down carefully) 2. Clean grille. (Don't put into hot water. Use non-abrasive kitchen detergent, wipe dry with clean cloth) (Fig.17) Mounting spring Gloves Ceiling Motion sensor (FV-MSVK1 only) 3. The grille should be dry after cleaning. 4. Remove dust and dirt from fan body using a vacuum cleaner. (Fig.18) 5. Using a cloth dampened with kitchen detergent, remove any dirt from fan body. Wipe dry with clean cloth. (Fig.19) 6. Reinstall grille. Slot Grille Fig.15 Clasp LED night light (FV-NLVK1 only) Fig.16 Gloves Fig.17 Ceiling Vacuum cleaner Fig.18 Ceiling Gloves Fig.19 11