Panasonic FV08VKSL4 FV08VKL4 User Guide - Page 12

PRACTICAL GUIDE TO INSTALLATION Properly insulate the area around the fan to minimize building heat loss and gain.(Fig.23) Loose fill or batt insulation can be placed directly over the fan housing in the attic. Our fans and fan/light combination units do not create excessive heat that is a common problem with recessed light fixtures or some competitors' fan/light combinations. Our efficient, cool-running motors and our fluorescent lamp do not create enough ambient heat to be subjected to these limitations. 4 inches or 6 inches roof jack, wall cap, or soffit vent with backdraft damper Mechanically connect duct to termination and seal with mastic or approved foil faced tape 2-3 ft straight run before elbow In attic installation, caulk box to drywall Short piece of flexible duct helps alignment and absorbs sound. Clamps plus mastic or approved foil faced tape at all flex joints Insulation Foil tape tightly covers all metal duct joints (glue PVC joints) Fig.23 SPECIFICATIONS • Specifications Model No. Duct Power consumption (W) Air volume Air direction Voltage (V) Frequency (Hz) diameter (inches) Noise (sones) Fan Lighting unit Fluorescent lamp Night lamp S(rppemed) at 0.1ING (CFM) Weight lb.( kg) FV-13VKML4 FV-13VKSL4 Exhaust 120 60 FV-13VKL4 6 0.8 16 26 4 746 130 11.2(5.1) FV-11VKL4 Exhaust 120 60 4 or 6 0.7 12.5 26 4 987 110 10.8(4.9) FV-08VKML4 FV-08VKSL4 Exhaust 120 60 4 or 6