Panasonic FV08VKSL4 FV08VKL4 User Guide - Page 5

Description, Unpacking, Supplied, Accessories

Page 5 highlights

DESCRIPTION These products are listed by UL under UL file No. E78414. These products use a sirocco fan driven by a DC motor powered by an integral transformer. The motor is designed to have long operating life, high dynamic response, higher speed ranges with saving energy. The grille covering the fan body is a spring-loaded, quick remove type. A damper for preventing air counter flow is provided. The blower uses a high-capacity sirocco fan developed to reduce the noise level. Models of FV-13VKML4 and FV-08VKML4 are equipped with a motion sensor that shifts the fan to high flow automatically when motion is detected. It is user-adjustable to operate 0.5-60 minutes after motion is no longer detected. The lighting unit is an energy-saving, lighting device that uses two 13W fluorescent lamps and produces almost the same illumination as a standard 100W incandescent lamp. FCC Note: This equipment contains two self-ballast fluorescent lamp and is in compliance with Part 18 of the FCC Rules as consumer RF lighting device. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning this product on and off, the user is encouraged to try to correct the interference by one of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect equipment into outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Warning: This equipment must be installed in accordance with installation instructions. Also, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 18 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Responsible Party: Panasonic Corporation of North America Customer Support: One Panasonic Way, Secaucus, New Jersey 07094 1-866-292-7292 UNPACKING Unpack and carefully remove the unit from carton. Refer to the Supplied Accessories list to verify that all parts are present. SUPPLIED ACCESSORIES Part name Grille Suspension bracket I Suspension bracket II Suspension bracket III Suspension bracket IV Appearance Quantity I=- vo-rim3vodKervillo4f: FF FV-08VKML4 1 For models of: nl 1FV-13VKSL4 = FV-08VKSL4 m _ FV-13VKL4 FV-11VKL4 FV-08VKL4 ; I 1 1 .c' 1 1 Part name Screw I (ST4.2X6) Screw II (ST4.2X14) Long screw (ST4.2X20) Installation instructions Warranty sheet 13W Fluorescent lamp 4W Night lamp Appearance 0 1) IE) ) Quantity 2 1 6 2 1 2 d r. 1 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12

DESCRIPTION
These
products
are
listed
by
UL
under
UL
file
No.
E78414.
These
products
use
a
sirocco
fan
driven
by
a
DC
motor
powered
by
an
integral
transformer.
The
motor
is
designed
to
have
long
operating
life,
high
dynamic
response,
higher
speed
ranges
with
saving
energy.
The
grille
covering
the
fan
body
is
a
spring
-loaded,
quick
remove
type.
A
damper
for
preventing
air
counter
flow
is
provided.
The
blower
uses
a
high
-capacity
sirocco
fan
developed
to
reduce
the
noise
level.
Models
of
FV-13VKML4
and
FV-08VKML4
are
equipped
with
a
motion
sensor
that
shifts
the
fan
to
high
flow
automatically
when
motion
is
detected.
It
is
user
-adjustable
to
operate
0.5-60
minutes
after
motion
is
no
longer
detected.
The
lighting
unit
is
an
energy
-saving,
lighting
device
that
uses
two
13W
fluorescent
lamps
and
produces
almost
the
same
illumination
as
a
standard
100W
incandescent
lamp.
FCC
Note:
This
equipment
contains
two
self
-ballast
fluorescent
lamp
and
is
in
compliance
with
Part
18
of
the
FCC
Rules
as
consumer
RF
lighting
device.
These
limits
are
designed
to
provide
reasonable
protection
against
harmful
interference
in
a
residential
installation.
This
equipment
generates,
uses
and
can
radiate
radio
frequency
energy
and,
if
not
installed
and
used
in
accordance
with
the
instructions,
may
cause
harmful
interference
to
radio
communications.
However,
there
is
no
guarantee
that
interference
will
not
occur
in
a
particular
installation.
If
this
equipment
does
cause
harmful
interference
to
radio
or
television
reception,
which
can
be
determined
by
turning
this
product
on
and
off,
the
user
is
encouraged
to
try
to
correct
the
interference
by
one
of
the
following
measures:
Reorient
or
relocate
the
receiving
antenna.
Increase
the
separation
between
the
equipment
and
receiver.
Connect
equipment
into
outlet
on
a
circuit
different
from
that
to
which
the
receiver
is
connected.
Consult
the
dealer
or
an
experienced
radio/TV
technician
for
help.
Warning:
This
equipment
must
be
installed
in
accordance
with
installation
instructions.
Also,
any
changes
or
modifications
not
expressly
approved
by
the
party
responsible
for
compliance
could
void
the
user's
authority
to
operate
this
equipment.
This
device
complies
with
Part
18
of
the
FCC
Rules.
Operation
is
subject
to
the
following
two
conditions:
(1)
This
device
may
not
cause
harmful
interference,
and
(2)
this
device
must
accept
any
interference
received,
including
interference
that
may
cause
undesired
operation.
Responsible
Party:
Panasonic
Corporation
of
North
America
One
Panasonic
Way,
Secaucus,
New
Jersey
07094
Customer
Support:
1-866-292-7292
UNPACKING
Unpack
and
carefully
remove
the
unit
from
carton.
Refer
to
the
Supplied
Accessories
list
to
verify
that
all
parts
are
present.
SUPPLIED
ACCESSORIES
Part
name
Appearance
Quantity
Grille
1
I
FF
vo-rim3vodKervillo4f:
=-
FV-08VKML4
For
models
of:
l
=
m
n1
FV-13VKSL4
_
FV-08VKSL4
FV-13VKL4
FV-11VKL4
FV-08VKL4
Suspension
bracket
I
;
I
1
Suspension
bracket
II
1
Suspension
bracket
III
.c'
1
Suspension
bracket
IV
1
Part
name
Appearance
Quantity
Screw
I
(ST4.2X6)
0
1)
2
Screw
II
(ST4.2X14)
I
E)
)
1
Long
screw
(ST4.2X20)
6
Installation
instructions
2
Warranty
sheet
1
13W
Fluorescent
lamp
2
4W
Night
lamp
d
r.
1
5