Panasonic HC-VX981K Advanced Operating Manual - Page 189
Setting up a direct connection to a smartphone
View all Panasonic HC-VX981K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 189 highlights
9 (When selecting [WEP]/[TKIP]/[AES]) Touch [INPUT], then enter the Password. ≥ For details on how to enter characters, refer to page 116. ≥ When the entry is complete, touch [Enter]. ≥ A message is displayed when the connection is complete. Touch [ENTER], and exit [Wireless Settings]. Confirming that the Wi-Fi connection is complete j The status indicator of this unit is lit green j is displayed on the screen ≥ Check the wireless access points instruction manual and settings when a saving wireless access point. ≥ The Encryption methods are [AES], [TKIP] and [WEP] in descending order of strength. We recommend you connect with the strongest possible Encryption method. ≥ When the signal of the wireless access point is weak, a connection may not be established. Refer to "Messages" (l 238) and "Troubleshooting" (l 240) for details. ≥ Transmission speed may decrease, or may not be usable depending on the environment it is used in. Setting up a connection manually Setting up a direct connection to a smartphone Check the [Direct Connection Password] setting in [Wi-Fi Setup]. (l 195) ≥ The default setting is [OFF]. Select [ON] as needed, for example when the setting seems necessary for your Wi-Fi environment. ≥ When [Direct Connection Password] is set to [OFF] j Proceed to the following section, "When [Direct Connection Password] is set to [OFF]" in "Using [Link to Cell] with a direct connection". (l 159) ≥ When [Direct Connection Password] is set to [ON] If your smartphone is compatible with WPS, refer to "[WPS Connection]". If not, refer to "Connecting with QR code". [HC-WXF991PP]/[HC-VX981PP]: Enter SSID and Password or scan QR code to connect. j Proceed to the following [WPS Connection] j Proceed to the "Connecting with QR code" (l 190) j Proceed to the "Connecting by entering an SSID and Password" (l 191) When the Wi-Fi connection is complete, refer to "When [Direct Connection Password] is set to [ON]" in "Using [Link to Cell] with a direct connection". (l 160) [WPS Connection] 1 Press Wi-Fi button on this unit and touch [Wi-Fi Setup]. 2 Touch [Direct Connection]. 3 Touch [Change connection type]. 4 Touch [WPS Connection]. - 189 -