Panasonic HCV500M HCV500 User Guide - Page 139

Problem This unit cannot be operated though it is turned on. This unit does not operate normally. "ERROR OCCURRED. PLEASE TURN UNIT OFF, THEN TURN ON AGAIN." is displayed. Power Check points ≥ Remove the battery or AC adaptor, wait about 1 minute and then reconnect the battery or AC adaptor. Then about 1 minute later, turn on the unit again. (Conducting the above operation while the media is being accessed may damage the data on the media.) ≥ If normal operation is still not restored, detach the power connected, and contact consumer support. (l 159, 160, 161) ≥ The unit has automatically detected an error. Restart the unit by turning the unit off and on. ≥ The unit will be turned off in about 1 minute if the unit is not turned off and on. ≥ Repair is needed if it is repeatedly displayed even if it is restarted. Detach the power connected, contact consumer support. (l 159, 160, 161) Do not attempt to repair the unit by yourself. Problem Remaining battery indication is not displayed properly. Indication Check points ≥ The remaining battery capacity indication is an approximation. If the remaining battery capacity indication is not displayed correctly, fully charge the battery, discharge it and then charge it again. Problem The unit arbitrarily stops recording. Auto Focus function does not work. Recording Check points ≥ Use an SD card that can be used for motion picture recording. (l 23) ≥ The recordable time may have shortened due to the deterioration of the data writing speed or repeated recording and deletion. Using the unit, format the SD card or built-in memory. (l 48) ≥ If [AGS] is [ON], record in the normal horizontal position or set [AGS] to [OFF]. (l 70) ≥ Switch to Intelligent Auto Mode. ≥ If you are trying to record a scene which is hard to bring into focus in Auto Focus Mode, use the Manual Focus Mode to adjust the focus. (l 37, 80) 139 VQT3W31