Panasonic HCV500M HCV500 User Guide - Page 45
QUICK START], ALERT SOUND], Set [QUICK START] to [ON]., Close the LCD monitor.
View all Panasonic HCV500M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
[QUICK START] [ON]/[OFF] This unit is put into recording pause approx. 0.6 seconds after the LCD monitor is reopened. ≥ When in Quick Start Standby Mode about 70% of the power used in recording pause mode is being consumed, so the recording time will be reduced. ≥ HC-V500 Quick Start will not work if there is no SD card inserted. ≥ HC-V500M Quick Start will not work if the [SD CARD] is selected in the [MEDIA SELECT], even if there is no SD card inserted. ≥ Change the mode to or . 1 Set [QUICK START] to [ON]. 2 Close the LCD monitor. The status indicator A flashes green and the unit goes into Quick Start standby mode. ≥ The lens cover does not close. 3 Open the LCD monitor. The status indicator A lights red and the unit is put into recording pause. ≥ Quick Start Standby Mode is canceled if j about 5 minutes have elapsed j mode is set to ≥ Depending on the recording conditions and menu settings, time for Quick Start may be longer than 0.6 seconds. ≥ It may take some time for Automatic White Balance to adjust. ≥ In the Quick Start Mode, the zoom magnification becomes approx. 1k. ≥ When it has gone into Quick Start Standby Mode automatically with the [ECONOMY (BATT)] (l 44)/[ECONOMY (AC)] (l 44), close the LCD monitor once and open it again. ≥ Turn the unit off using the power button. [ALERT SOUND] / /[OFF] Touch screen operation, starting and stopping of recording and unit on/off can be confirmed with this sound. (Volume low)/ (Volume high) 2 Beeps for 4 times When an error occurs. Check the sentence displayed on the screen. (l 136) 45 VQT3W31