Panasonic HDCHS300 Hd Sd Camcorder - Multi Language - Page 134
If the driver has not been, recognized properly, To disconnect USB cable safely
View all Panasonic HDCHS300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
∫ If the driver has not been recognized properly Use the following methods to enable it to be recognized. Method 1: Turn off the unit and your PC once and try verifying again. Method 2: Remove the SD card and try verifying again. Method 3: Try connecting the unit to another USB port on your PC. ∫ To disconnect USB cable safely 1 Double click the ( ) icon in task tray displayed on the PC. ≥ Depending on your PC's settings, this icon may not be displayed. 2 Select [USB Mass Storage Device] and click [Stop]. 3 Verify [MATSHITA HDC-TM300/SD USB Device] or [MATSHITA HDC-TM300/MEM USB Device] is selected and click [OK]. Verify [MATSHITA HDC-HS300/SD USB Device] or [MATSHITA HDC-HS300/HDD USB Device] is selected and click [OK]. 134 VQT1Z09
134
VQT1Z09
∫
If the driver has not been
recognized properly
Use the following methods to enable it to be
recognized.
Method 1:
Turn off the unit and your PC once and try
verifying again.
Method 2:
Remove the SD card and try verifying again.
Method 3:
Try connecting the unit to another USB port on
your PC.
∫
To disconnect USB cable safely
1
Double click the
(
) icon in task
tray displayed on the PC.
≥
Depending on your PC’s settings, this icon
may not be displayed.
2
Select [USB Mass Storage Device] and
click [Stop].
3
Verify [MATSHITA HDC-TM300/SD USB
Device] or [MATSHITA HDC-TM300/MEM
USB Device] is selected and click [OK].
Verify [MATSHITA HDC-HS300/SD USB
Device] or [MATSHITA HDC-HS300/HDD
USB Device] is selected and click [OK].