Panasonic HDCHS300 Hd Sd Camcorder - Multi Language - Page 80
Auto Ground-Directional Standby, function is turned [ON] are played back
View all Panasonic HDCHS300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Night portrait ≥ The shutter speed is 1/2 or more. ≥ The flash is set to [ON]. ≥ Using a tripod is recommended. Interval recording: ≥ Still picture recording cannot be used. ≥ Recording mode cannot be changed when the interval recording is set. ≥ If you turn off the power or change the mode to , this function is canceled. ≥ 1 second of motion picture is recorded even if 24 frames are not recorded at the end of recording. ≥ Color balance and focus may not be adjusted automatically depending on light sources or scenes. If so, manually adjust these settings. (l 83, 85) Digital cinema: ≥ Motion pictures recorded while this setting is turned [ON] may not be played back properly with a player that cannot support 24p video signal playback. Relay recording: ≥ It does not allow the relay recording of still pictures. However, even still pictures are recorded to the SD card after relay recording. ≥ is displayed on the thumbnail display during the playback of a scene that was relay recorded on the built-in memory. Auto Ground-Directional Standby ≥ The AGS function may activate and cause the unit to pause the recording if you are recording a subject right above or right below you. Auto slow shutter: ≥ When the shutter speed becomes 1/30, the screen may be seen as if frames are missed and afterimages may appear. Digital cinema color: ≥ When motion pictures recorded while this function is turned [ON] are played back with a TV not compatible with x.v.Color™, colors may not be reproduced properly. ≥ To play back images recorded in Digital cinema color with vivid colors of wider color ranges, a device compatible with x.v.Color™ is required. When these images are played back with devices other than ones compatible with x.v.Color™, it is recommended to record the images after this function is turned [OFF]. ≥ x.v.Color™ is a name for devices that are compatible with the xvYCC format, an international standard for expanded color in motion pictures, and that follow the rules for signal transmission. Wind noise reduction: ≥ When the Intelligent Auto Mode is set to on, [WIND CUT] is set to [ON], and the setting cannot be changed. ≥ The sound quality may be changed if this function is activated in strong winds. ≥ If wind sound cannot be reduced with the wind noise reduction function alone, set [BASS SETTING] to [LOWCUT]. (l 76) Microphone setup: ≥ If you wish to record higher quality sound and maintain realism even when zooming in, for instance, when recording a music recital, we recommend setting [MIC SETUP] to [SURROUND]. Microphone level: ≥ When the Intelligent Auto Mode is on, the setting is fixed to [AUTO] and cannot be changed. ≥ When [MIC SETUP] is [ZOOM MIC], the volume will be different depending on the zoom rate. ≥ Audio becomes stereo (2 ch) when input is from an external microphone, and the front left and front right gain values only work. ≥ The microphone input level meter shows the largest volume for the microphones. ≥ You cannot record with the audio completely muted. Luminance: ≥ Luminance is displayed while adjusting [IRIS] even if [DISPLAY] is set to [OFF]. Histogram: ≥ Histogram is displayed while adjusting [IRIS] even if [DISPLAY] is set to [OFF]. 80 VQT1Z09