Panasonic Handheld P2 HD Camcorder with AVC-ULTRA Recording Operating Instruct - Page 139
LOW 2CH MOV], [AVC-G6 2CH MOV], 256Kbps], [512Kbps], [1Mbps]
View all Panasonic Handheld P2 HD Camcorder with AVC-ULTRA Recording manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
Item [START DELAY] [PRE REC] [ONE CLIP REC] [SIMUL REC] [BACKGROUND REC] [DUAL CODEC SETTING] [CODEC USAGE] [STREAMING MODE] [PROXY REC MODE] [PROXY DISP] [QoS MAX RATE] [QoS MIN RATE] [STREAMING LATENCY] [START TEXT MEMO] [TIME STAMP] [DF MODE] [TCG] [TC PRESET] Chapter 6 Menu Operations - Menu list Description of settings Selects whether to delay the recording start time by approximately one second when performing interval recording or one-short recording. [ON], [OFF] ffFactory setting: [OFF] Selects whether to perform pre-recording. If [ON] is selected, pre-recording is performed for approximately three seconds in HD, and for approximately seven seconds in SD. [ON], [OFF] ffFactory setting: [OFF] Selects whether to perform one-clip recording. [ON], [OFF] ffFactory setting: [OFF] Selects whether to perform simultaneous recording. [ON], [OFF] ffFactory setting: [OFF] Selects whether to perform background recording. [ON], [OFF] ffFactory setting: [OFF] Selects media for recording proxy data. [PROXY REC(P2)]: Records proxy data to a P2 card. [PROXY REC(P2&SD)]: Records proxy data to both of a P2 card and SD memory card. [STREAMING]: Outputs streaming. [OFF]: Does not record proxy data. ffFactory setting: [OFF] If the [CODEC USAGE] setting cannot be changed, change the [PROXY REC MODE] or [STREAMING MODE] setting. Sets the transfer mode for streaming. [LOW], [HQ], [AVC‑G6], [SHQ (QoS)], [AVC-G (QoS)] ffFactory setting: [HQ] Sets the recording mode of proxy data. [LOW 2CH MOV], [HQ 2CH MOV], [SHQ 2CH MOV], [AVC-G6 2CH MOV] ffFactory setting: [HQ 2CH MOV] Selects whether to display proxy data recorded information or messages in the viewfinder and LCD monitor. [ON]: Displays proxy recording information and SD memory card remaining capacity at the start of recording. Warning information is displayed at all times. [OFF]: Displays proxy and SD memory card warning information for only three seconds when warning occurs. ffFactory setting: [OFF] Sets the maximum bitrate for video data when the QoS is operating. This setting is used when the streaming distribution is started from the operation of the camera. This can be set when [CAMERA] is selected in the main menu → [NETWORK SETUP] → [STREAMING SETTING] → [START TRIGGER]. [256Kbps], [512Kbps], [1Mbps], [1.5Mbps], [2.5Mbps], [3.5Mbps], [6Mbps], [9Mbps] ffFactory setting: [9Mbps] [9Mbps] cannot be selected when [STREAMING MODE] is set to [SHQ (QoS)]. Sets the minimum bitrate for video data when the QoS is operating. This setting is used when the streaming distribution is started from the operation of the camera. This can be set when [CAMERA] is selected in the main menu → [NETWORK SETUP] → [STREAMING SETTING] → [START TRIGGER]. [256Kbps], [512Kbps], [1Mbps], [1.5Mbps], [2.5Mbps], [3.5Mbps], [6Mbps], [9Mbps] ffFactory setting: [256Kbps] Sets the delay mode during the streaming distribution. This setting is used when the streaming distribution is started from the operation of the camera. This can be set when [CAMERA] is selected in the main menu → [NETWORK SETUP] → [STREAMING SETTING] → [START TRIGGER]. [NORMAL]: Sets if you want to emphasize the stability of streaming. [SHORT]: Sets if you want to emphasize the reduction of streaming delay. ffFactory setting: [NORMAL] Selects whether to automatically add a text memo at recording start position each time recording is started. [ON], [OFF] ffFactory setting: [OFF] Selects whether to superimpose [DATE]/[TIME] information on shot videos. [ON]: Superimposes information set in the [DATE]/[TIME] item on video. [OFF]: Does not superimpose information set in the [DATE]/[TIME] item on video. ffFactory setting: [OFF] Sets the counting method of the built-in time code generator. [DF]: Uses the drop frame mode. [NDF]: Uses the non-drop frame mode. ffFactory setting: [DF] Sets the operation mode to advance the built-in time code generator. [FREE RUN]: Advances regardless of the operation mode. [REC RUN]: Advances when recording is in process. ffFactory setting: [REC RUN] In native recording in variable frame rate mode, if the number of frames differs for shooting and recording, the time code operation will be [REC RUN]. Sets the default value of the time code to record. - 139 -