Panasonic Handheld P2 HD Camcorder with AVC-ULTRA Recording Operating Instruct - Page 200
Maintenance, Charging the built-in battery
View all Panasonic Handheld P2 HD Camcorder with AVC-ULTRA Recording manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 200 highlights
Maintenance Chapter 10 Maintenance and Inspection - Maintenance Charging the built-in battery The camera uses the built-in battery to remember the date and time. If [BACKUP BATT EMPTY] is displayed on the viewfinder or LCD monitor, the built-in battery is running out. Charge the built-in battery with the following procedure. 1 Make sure that the power switch is . 2 Connect the AC adaptor to the camera. For details on the connection of AC adaptor, refer to "Using the AC adaptor" (page 27). 3 Leave the camera for approx. four hours. The built-in battery will be charged. After charging completes, set the date and time and check the time code. If [SET DATE AND TIME] is displayed on the viewfinder or LCD monitor, set the date/time of the internal clock. (page 33) If [BACKUP BATT EMPTY] is still displayed after charging, the built-in battery needs to be replaced. Consult your dealer. - 200 -