Panasonic KV-S7075C Operation Manual - Page 39

Cleaning the Unit ∫ Cleaning the starting, skew and ending sensors How to clean sensors (detectors) and reflectors. Remove the brush from the accessory blower and blow off the dirt with the blower. Blower Sensor (detector) 1 Turn off the scanner. 2 Pull the exit door release to open the exit door. 3 Blow off the dirt on the surface of the starting, skew (L), skew (R), and ending sensors with the accessory blower. Ending sensor Skew (R) sensor Skew (L) sensor Starting sensor 4 And blow off the dirt from the reflector sheets for the starting, skew (L), skew (R), and ending sensors with the blower. 5 Close the exit door. ≥ When you close the exit door, close it securely until it is locked. Reflector sheet for skew (R) sensor Reflector sheet for starting sensor Reflector sheet for skew (L) sensor Reflector sheet for ending sensor 39