Panasonic KV-S7075C Operation Manual - Page 40

Cleaning the flatbed glass and document cover detector, How to clean sensors detectors.

Page 40 highlights

Cleaning the Unit ∫ Cleaning the flatbed glass and document cover detector How to clean sensors (detectors). Remove the brush from the accessory blower and blow off the dirt with the blower. Blower Sensor (detector) 1 Turn off the scanner. 2 Fold the hopper tray in the direction of the arrow. 3 Open the document cover. Hopper tray Document cover 4 Clean up the surface of flatbed glass with the roller cleaning paper (KVSS03) to remove the dirt. (Also clean up the surface of the flatbed sheet, as required.) 5 Blow off the dirt from the document cover detector. 6 Close the document cover and put back the hopper tray to the original position. 40 Flatbed sheet Flatbed glass Document cover detector

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53

Cleaning the Unit
40
Cleaning the flatbed glass and document cover detector
How to clean sensors (detectors).
Remove the brush from the accessory blower and blow off the dirt with the blower.
1
Turn off the scanner.
2
Fold the hopper tray in the direction of
the arrow.
3
Open the document cover.
4
Clean up the surface of flatbed glass
with the roller cleaning paper (KV-
SS03) to remove the dirt.
(Also clean up the surface of the
flatbed sheet, as required.)
5
Blow off the dirt from the document
cover detector.
6
Close the document cover and put
back the hopper tray to the original
position.
Blower
Sensor (detector)
Hopper tray
Document cover
Flatbed sheet
Flatbed glass
Document cover detector