Panasonic KX-HNC200 Installation Guide - Page 12
Appendix, Testing the motion detection range, Features available when using the [Home Network] app
View all Panasonic KX-HNC200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Appendix Testing the motion detection range After you have installed the [Home Network] app on your mobile device, you can use your mobile device to test the performance of the camera's motion detection feature. For more information, refer to the User's Guide (page 13). 1 Start the [Home Network] app and display live images from the camera. 2 Move to an area within the camera's viewable area. 3 While moving near the camera, use your mobile device to observe where you are in the viewable area when the camera's motion detection feature is triggered. R When the motion detection feature is triggered, the camera's LED indicator lights in red for about 3 seconds. 4 Note the areas of the viewable area where movement is detected, and make adjustments as necessary. Note: R You can adjust the area detectable by the visual sensor. For more information, refer to the User's Guide (page 13). Testing the microphone To test the microphone, speak loudly and clearly into the microphone while a mobile device user is viewing live images from the camera. Features available when using the [Home Network] app Some of the features that are available when using the [Home Network] app are listed below. For more information, refer to the User's Guide (page 13). - Alarm system You can use the app to arm and disarm the alarm system, confirm the current status of the sensor, and view a log of previous events. - Live camera monitoring You can view live images from the camera, even while away from home. - Listen and talk You can use your mobile device to talk and listen to anyone within range of the camera's microphone and speaker. - Sensor adjustment You can adjust the detection range of the visual sensor and the setting levels of the sound sensor and temperature sensor. - Sensor integration You can configure the camera's sensor features to trigger other system events, such as camera recording*1, turning on an electric device (such as a lamp), etc. (Appropriate device required.) *1 A commercially-available microSD card must be inserted into the hub in order to record images. - Notification You can configure the camera to send a notification to the [Home Network] app when the camera's sensor features are triggered, for example, when motion is detected, if a baby is crying (sound sensor) or if the room becomes too warm or too cold (temperature sensor). 12 For assistance, visit www.panasonic.ca/english/support HNC200C_(en_en)_0125_ver.301.pdf 12 2017/01/25 19:45:24