Panasonic KX-HNC800 Operating Manual - Page 19

Setting up the camera (initial setup - reset password

Get Panasonic KX-HNC800 PDF manuals and user guides View all Panasonic KX-HNC800 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 19 highlights

Setting up the camera (initial setup) Confirm the following before you begin. - Make sure you have installed the [Home Network] app on your mobile device - Make sure the camera is located within range of your wireless router - Make sure your mobile device is connected to your wireless router - Make sure your mobile device can connect to the Internet - Make sure you know the network name (SSID) and password assigned to your wireless router Setup Initial setup (for iPhone, iPad users) R Do not perform this procedure if you want to integrate the camera with your Home Network System. Use the procedure on page 24. R If your mobile device is already registered to a hub and you want to use your camera by itself, see "Information for current hub users", page 22. 1 Plug in the camera and wait about 1 minute for the camera's LED to light in green. R If the LED does not light in green, or if you experience trouble during this procedure, reset the camera (page 25) and then repeat this procedure. 2 Start the [Home Network] app. R If prompted, follow the on-screen instructions and select the appropriate region/country. 3 Tap [HD Camera]. 4 Tap [Set up the HD Camera]. 5 When prompted, press the MSETUPN button on the back For assistance, please visit http://shop.panasonic.com/support 19 HNC800_(en_en)_0902_ver.220.pdf 19 2016/09/05 17:54:31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
Setting up the
camera (initial
setup)
Confirm the following before you
begin.
–
Make sure you have installed
the
[Home Network]
app on
your mobile device
–
Make sure the camera is
located within range of your
wireless router
–
Make sure your mobile device
is connected to your wireless
router
–
Make sure your mobile device
can connect to the Internet
–
Make sure you know the
network name (SSID) and
password assigned to your
wireless router
Initial setup (for iPhone, iPad
users)
R
Do not perform this procedure
if you want to integrate the
camera with your Home
Network System. Use the
procedure on page 24.
R
If your mobile device is
already registered to a hub
and you want to use your
camera by itself, see
“Information for current hub
users”, page 22.
1
Plug in the camera and wait
about 1 minute for the
camera’s LED to light in green.
R
If the LED does not light in
green, or if you experience
trouble during this
procedure, reset the
camera (page 25) and
then repeat this procedure.
2
Start the
[Home Network]
app.
R
If prompted, follow the
on-screen instructions and
select the appropriate
region/country.
3
Tap
[HD Camera]
.
4
Tap
[Set up the HD Camera]
.
5
When prompted, press the
M
SETUP
N
button on the back
For assistance, please visit http://shop.panasonic.com/support
19
Setup
HNC800_(en_en)_0902_ver.220.pdf
19
2016/09/05
17:54:31