Panasonic KX-HNC800 Operating Manual - Page 23
Registering additional mobile devices to the camera, Network], HD Camera], Add This Mobile, Device]
View all Panasonic KX-HNC800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Setup Registering additional mobile devices to the camera Do not perform this procedure if the camera is integrated with your Home Network System. Use the procedure found in the System Setup Guide included with your hub and register the additional mobile device to your hub. After you set up the camera, you can register additional mobile devices. You can register up to 8 mobile devices to a camera. Each mobile device can be registered to up to 32 cameras. Confirm the following before you begin. - Make sure you have completed the initial setup procedure - Make sure your mobile device can connect to the Internet - Make sure your wireless router and the camera are turned on - Make sure your mobile device and the camera are connected to the same wireless router 1 Using the mobile device that you want to register, download the [Home Network] app and then start the app. R If prompted, follow the on-screen instructions and select the appropriate region/country. 2 Tap [HD Camera]. 3 Tap [Add This Mobile Device]. 4 When prompted, press the MSETUPN button on the back of the camera. R The camera registers your mobile device. 5 When prompted, enter the password required to access the camera. R This password was set during initial setup. 6 When prompted, enter a name for your mobile device and then tap [OK]. R This setting allows you to change the name assigned to your device. It can help you identify your mobile device when performing certain operations, such as deregistering a mobile device. R A list of all cameras registered to the app is displayed when registration is complete. For assistance, please visit http://shop.panasonic.com/support 23 HNC800_(en_en)_0902_ver.220.pdf 23 2016/09/05 17:54:31