Panasonic KX-HNC800 Operating Manual - Page 24
Registering the camera to your hub, Registering the camera, Home Network], Settings]
View all Panasonic KX-HNC800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Setup Registering the camera to your hub Do not perform this procedure if you are using the camera by itself (i.e., you do not have a KX-HNB600 hub). Use the initial setup procedure (page 19). If you want to integrate your HD camera with a Panasonic Home Network System, you must register the camera to the hub. Registering the camera Confirm the following before you begin. - Make sure you can use your mobile device to access the hub - Make sure the hub's firmware is up to date and that you are using the latest version of the [Home Network] app. For more information, refer to the System Setup Guide included with your hub and the User's Guide (page 31). 1 Plug in the camera and wait about 1 minute for the camera's LED to light in green. R If the LED does not light in green, or if you experience trouble during this procedure, reset the camera (page 25) and then repeat this procedure. 2 Start the [Home Network] app. 3 From the [Home Network] app home screen, tap [Settings]. 4 Tap [Device Registration] ® [Registration] ® [HD Camera] ® [Method 1]. 5 When prompted, press the MSETUPN button on the back of the camera. R The camera registers your mobile device. R The app's home screen is displayed when registration is complete. 6 Follow the on-screen instructions. When prompted, set the password that will be used to access the camera. Note: R When registration is complete, the hub sounds one long beep. R If registration fails, the hub sounds several short beeps. 24 For assistance, please visit http://shop.panasonic.com/support HNC800_(en_en)_0902_ver.220.pdf 24 2016/09/05 17:54:31