Panasonic KX-HNS101 Operating Instructions US - Page 14
Installation, Securing with screws
View all Panasonic KX-HNS101 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Setup Installation Install the window/door sensor in the same position where proper operation was confirmed (page 11). You can install the window/door sensor using screws or double-sided tape, depending on your preference or the material of the installation area. Note: R When installing, make sure the battery is inserted properly and the sensor unit cover is completely closed. R Use screws when installing on a wooden surface. Do not use double-sided tape. Securing with screws 1 Remove the covers from each unit. R Lift from the indented area (A) and open the sensor unit cover (B). 2 2 1 1 14 For assistance, please visit www.panasonic.com/support
Installation
Install the window/door sensor in the same position where proper operation was
confirmed (page 11). You can install the window/door sensor using screws or
double-sided tape, depending on your preference or the material of the installation
area.
Note:
R
When installing, make sure the battery is inserted properly and the sensor unit
cover is completely closed.
R
Use screws when installing on a wooden surface. Do not use double-sided tape.
Securing with screws
1
Remove the covers from each unit.
R
Lift from the indented area (
A
) and open the sensor unit cover (
B
).
1
2
1
2
14
For assistance, please visit www.panasonic.com/support
Setup