Panasonic KX-HNS101 Operating Instructions US - Page 9
Inserting the battery, Registering the window/door sensor, Using registration buttons, Using the app
View all Panasonic KX-HNS101 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
operation was confirmed (page 14). Inserting the battery R USE ONLY a CR2 Lithium battery. R Confirm the polarities ( , ). 1 Remove the sensor unit cover. R Lift from the indented area (A) and open the sensor unit cover (B). 2 Setup Registering the window/door sensor This procedure is not required for devices that were included as part of a bundle. Before you can use the window/door sensor, it must be registered to the hub. If you purchased devices separately (i.e., not as part of a bundle), you must register each device to the hub. You can register each device by using the registration buttons or the [Home Network] app. 1 2 Insert the battery. 3 Attach the sensor unit cover. Using registration buttons 1 Hub: Press and hold M OTHER DEVICEN until the LED indicator blinks in green. 2 Window/door sensor: Remove the sensor unit cover and press and hold M N until the LED indicator blinks in green (page 8). R When registration is complete, the hub sounds one long beep. Note: R To cancel registration, press M N on the hub and on the window/door sensor. R If registration fails, the hub sounds several short beeps. Using the app When you register the window/door sensor by using the [Home Network] app, you can assign a name to your For assistance, please visit www.panasonic.com/support 9