Panasonic KX-HNS105 KX-HNS105W - Owner's Manual - Page 11
Note about power, connections
View all Panasonic KX-HNS105 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
3 Use the DC extension cord (A) to connect the AC adaptor (B) to the siren. R Insert the male plug of the DC extension cord (C) firmly into the DC jack (D, E). R Insert the female plug of the DC extension cord (F) firmly into the AC adaptor plug (G). 4 Connect the AC adaptor to the power outlet (H). Setup 5 Attach the siren to the rear cover. R Insert the grooves on the siren to the 4 tabs on the rear cover, and then push down the siren. 4 3 Note: While the siren is sounding or the strobe light is flashing, you can stop the siren by pressing M N. 8 2 1 Note about power 6 connections 7 AC adaptor connection 5 R The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.) R The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor may cause it to become disconnected. Power failure R The siren will not work during a power failure. For assistance, please visit www.panasonic.com/support 11 HNS105_(en_en)_0209_ver.031.pdf 11 2015/02/09 21:38:39