Panasonic KX-HNS105 KX-HNS105W - Owner's Manual - Page 8
Registering the siren
View all Panasonic KX-HNS105 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Setup 4 Installation Install the siren in the desired location. Registering the siren This procedure is not required for devices that were included as part of a bundle. Before you can use the siren, it must be registered to the hub. If you purchased devices separately (i.e., not as part of a bundle), you must register each device to the hub. You can register each device by using the registration buttons or the [Home Network] app. Note: R Before registering the siren, make sure the AC adaptors of the hub and siren are connected and each device is powered. R If registration fails, the hub sounds several short beeps. Using the app When you register the siren by using the [Home Network] app, you can assign a name to your devices and group them by location. For more information, refer to the User's Guide (page 12). Using registration buttons 1 Hub: Press and hold M OTHER DEVICEN until the LED indicator blinks in green. 2 Siren: Press and hold M N until the LED indicator blinks in green (page 7). R When registration is complete, the hub sounds one long beep. Note: R To cancel without registering the siren, press M N on the hub and on the siren again. 8 For assistance, please visit www.panasonic.com/support HNS105_(en_en)_0209_ver.031.pdf 8 2015/02/09 21:38:39