Panasonic KX-P1131E Operating Instructions - Page 29

Using the Control Panel High Speed Mode The High Speed mode is a feature for doubling the print speed only when LQ Font and one of the 120 dpi, 180 dpi or 360 dpi of 24-pin bit image are selected. Note • When enabled, this feature will lower the print density. Turning on the High Speed mode: • While pressing ON LINE , press LF/FF . The HIGH SPEED indicator is on. Line Feed/Form Feed (LF/FF Switch) You can adjust the paper position by using the front panel switches when the printer is in the OFF LINE mode or when the printer is not printing in the ON LINE mode. • With paper installed, pressing LF/FF once advances the paper one line. • With paper installed, holding LF/FF moves the printhead to the center and advances the paper to the top of the next page. Turning off the High Speed mode: • While pressing ON LINE , press LF/FF . The HIGH SPEED indicator is off. Note • When pressing LF/FF , the amount of paper which is fed is determined by the current setting for lines per inch as specified through the Control Panel Software program, Control Panel (Initial Setup mode) or your application software. Tear Off (TEAR OFF Switch) Pressing the TEAR OFF switch advances your fanfold paper's perforation to the tear position, and pressing this switch again returns your paper to the first print line. Operating Instructions 29