Panasonic KX-TG2248S 2.4 Ghz Digital Cdl - Page 14

Programmable Functions Line Mode Handset The line mode is preset at the factory to "B". Generally leave the line mode "B". If a change of the line mode setting is required by our customer call center or service person, change the line mode to "A". >> > > >>>> 1 Press [MENU]. 2 Scroll to "Initial setting" by pressing [ ] or [ ], then press Select. 3 Scroll to "Set tel line" by pressing [ ] or [ ], then press Select. 4 Scroll to "Set line mode" by pressing [ ] or [ ], then press Select. 5 Select "A" or "B" by pressing [ ] or [ ]. 6 Press Save, then press [OFF]. >>>> > >> > Initial setting Exit Select Set tel line Back Select Set line mode Back Select Set line mode :B Back Save Voice Enhancer Technology Handset Voice Enhancer Technology ( ) helps clarify and improve sound reception creating a natural-sounding voice that is easy to hear and understand. This is accomplished by enhancing the frequency that is narrowed through the telephone line and comes pre-set to OFF at the factory. Under normal conditions, cordless phones are limited to a narrowed frequency bandwidth (300Hz to 3.5KHz). Panasonic's new Voice Enhancer Technology cordless phones are able to simulate a band signal above and below the normal bandwidth limitations. As a result, a clearer, crisp sound much closer to the actual voice is achieved. • " " is displayed when the Voice Enhancer Technology is set to ON. > > >> 1 Press [MENU]. 2 Scroll to "Voice enhancer" by pressing [ ] or [ ], then press Select. 3 Select "On" or "Off" by pressing [ ] or [ ]. 4 Press Save, then press [OFF]. >> > > Voice enhancer Exit Select Voice enhancer :Off Back Save Helpful hint: Depending on the condition and quality of your telephone line, Voice Enhancer may emphasize the noise already on the line. If it becomes difficult to hear the caller, please set the Voice Enhancer mode to OFF. 14